Abstract:Two inductorless low-power differential low-noise amplifiers (LNAs) are designed for multiband wireless communication applications. Both LNAs are based on the combination of common-gate (CG) and shunt feedback topologies. In the first LNA, the cross-coupled push-pull structure with separated bias for nMOS and pMOS CG transistors is utilized to realize gm enhancement, partial noise cancellation, and bandwidth extension. In the second LNA, cascode transistors are utilized on the basis of the first topology to alleviate the Miller effect and to construct current steering structures, so as to extend the bandwidth. For both LNAs, in-depth analysis is given, and methods for sizing and biasing optimization under power constraint are proposed to obtain good overall performance tradeoffs while maintaining low-power consumption. The prototypes are implemented in 65-nm low-power CMOS technology. The first LNA achieves a gain of 21.2 dB, a noise figure (NF) of 3-3.5 dB over the 3-dB bandwidth of 200 MHz to 2.7 GHz and an IIP3 of -2 dBm at 1.1 GHz. It consumes 0.96 mW from 1.2-V supply. The second LNA exhibits a gain of 21.2 dB, an NF of 2.8-4 dB over the 3-dB bandwidth of 100 MHz to 4.3 GHz. It consumes 2 mW from 1.2-V supply. Each LNA occupies an area of 0.05 mm(2).

6.8 Mw 15 Dbm IIP3 CMOS Common‐gate LNA Employing Post‐linearisation Technique

Ultralow Power E-Band Low-Noise Amplifier with Three-Stacked Current-Sharing Amplification Stages in 28-Nm CMOS

A 0.061-Mm² 1–11-Ghz Noise-Canceling Low-Noise Amplifier Employing Active Feedforward with Simultaneous Current and Noise Reduction

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

A Highly Linear 2.4GHz Low Noise Amplifier

A 6.512-GHz Balanced Variable-Gain Low-Noise Amplifier With Frequency-Selective Gain Equalization Technique

3-10 GHz self-biased resistive-feedback lna with inductive source degeneration

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

A 26–31 GHz Linearized Wideband CMOS LNA Using Post-Distortion Technique

A 0.9V 0.1-4Ghz LNTA in 28-Nm CMOS Achieving +11.3dbm IIP3 with Self-loaded Linearization Technique.

A 0.1–3.5-Ghz Inductorless Noise-Canceling CMOS LNA with IIP3 Optimization Technique

A High Gain and High Linearity Current‐reused CMOS LNA Using Modified Derivative Superposition Technique with Bulk‐bias Control

A Low Power High Gain UWB LNA in 0.18-Μm CMOS

A 60–90-Ghz CMOS Double-Neutralized LNA Technology with 6.3-Db NF and −10dbm P−1dB

A 0.18 Mu M Cmos Ultra-Wideband Low-Noise Amplifier With High Iip3

A 22-32.7 GHz Linearized LNA in 65-nm CMOS Using Multigate Transistor Technique

A High-Gain Differential Cmos Lna For 3.1-10.6 Ghz Ultra-Wideband Receivers

A Power Reduction Technique for Wideband Common Gate Low Noise Amplifers

A 0.0081mm2 0.15–5.9-Ghz Low Noise Amplifier with Noise Cancelling and Current Reuse Techniques

A High-Linearity Wideband Common-Gate LNA with a Differential Active Inductor.

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.