Abstract:Modern CMOS imaging devices are present everywhere, in the form of line, area and depth scanners. These image devices can be used in the automotive field, in industrial applications, in the consumer’s market, and in various medical and scientific areas. Particularly in industrial and scientific applications, the low-light noise performance or the high dynamic-range features are often the cases of interest, combined with low power dissipation and high frame rates. In this sense, the noise floor performance and the power consumption are the focus of this work, given that both are interlinked and play a direct role in the remaining sensor features. It is known that thermal and flicker noise sources are the main contributors to the degradation of the sensor performance, concerning the sensor output image noise. This paper presents an indirect way to reduce both the thermal and the flicker noise contributions by using thin-oxide low voltage supply column readout circuits and fast 3rd order incremental sigma-delta converters with noise shaping capabilities (to provide low noise output digital samples—74 μVrms; 0.7 e−rms; at 105 μV/e−), and thus performing correlated double sampling in a short time (19 μs), while dissipating significant low power (346 μW). Throughout the extensive parametric transistor-level simulations, the readout path produced 1.2% non-linearity, with a competitive saturation capacity (6.5 ke−) pixel. In addition, this paper addresses the readout parallelism as the main point of interest, decoupling resolution from the image noise and the frame rate, at virtually any array resolution. The design and simulations were performed with Virtuoso 6.17 tools (Cadence Design Systems, San Jose, CA, USA) using Spectre models from TS18IS Image Sensor 0.18 μm Process Development Kit (Tower Jazz Semiconductor, Migdal Haemek, Israel).

Mitigating Sampling Noise for Energy-Efficient ADCs: A Tutorial Brief

A SAR ADC with Reduced kT/C Noise by Decoupling Noise PSD and BW

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

Power-Efficient Sampling

Error Suppression Techniques for Energy-Efficient High-Resolution SAR ADCs

eSampling: Energy Harvesting ADCs

Design Techniques for Energy-Efficient Analog-to-Digital Converters

Suppression of Spectral Leakage in ADC Testing

Low Frequency Noise Elimination Technique For 24-Bit Sigma-Delta Data Acquisition Systems

Recent Advances in High-Resolution Hybrid Discrete-Time Noise-Shaping ADCs

A 0.7-V 0.6- $\mu \text{w}$ 100-Ks/s Low-Power SAR ADC with Statistical Estimation-Based Noise Reduction

Incremental Delta-Sigma ADCs: A Tutorial Review

A 188.6-Μw Continuous-time Incremental Delta-Sigma ADC with Extended Counting Achieving 95.2-Db SNDR and 175.4-Db FoMSNDR

Efficient Algorithm for Multi-Tone Spectral Test of Adcs Without Requiring Coherent Sampling

A Low Power 12-Bit 20msamples/s Pipelined Adc

A Low Power Noise-Shaping SAR ADC with Improved Integrator and Hybrid DAC Mismatch Mitigation Technique

Design Improvements on Fast, High-Order, Incremental Sigma-Delta ADCs for Low-Noise Stacked CMOS Image Sensors

A Cost-Efficient 12-Bit 20msamples/s Pipelined Adc

Accurate and Cost-Effective Technique for Jitter and Noise Separation Based on Single-Frequency Measurement

An Energy-Efficient Readout Circuit Based on Incremental Delta-Sigma ADC with Decimation Filter for CMOS Image Sensors

Basic Theoretical Model and Sampling Criteria for Time-Interleaved Photonic Analog-to-Digital Converters