Abstract:This study aims towards a systematic reciprocity of the tunable synthesis parameters - partial pressure of N2 gas, ion energy (Ei) and Ti interface in TiN thin film samples deposited using ion beam sputtering at ambient temperature (300 K). At the optimum partial pressure of N2 gas, samples were prepared with or without Ti interface at Ei = 1.0 or 0.5 keV. They were characterized using x-ray reflectivity (XRR) to deduce thickness, roughness and density. The roughness of TiN thin films was found to be below 1 nm, when deposited at the lower Ei of 0.5 keV and when interfaced with a layer of Ti. Under these conditions, the density of TiN sample reaches to 5.80(<math>±</math>0.03) g cm−3, a value highest hitherto for any TiN sample. X-ray diffraction and electrical resistivity measurements were performed. It was found that the cumulative effect of the reduction in Ei from 1.0 to 0.5 keV and the addition of Ti interface favors (111) oriented growth leading to dense and smooth TiN films and a substantial reduction in the electrical resistivity. The reduction in Ei has been attributed to the surface kinetics mechanism (simulated using SRIM) where the available energy of the sputtered species (<math><</math>Esp>) leaving the target at Ei = 0.5 keV is the optimum value favoring the growth of defects free homogeneously distributed films. Secondary ion mass spectroscopy depth profile measurements confirm the uniform distribution of N and Ti across the depth of a sample. The electronic structure of samples was probed using N K-edge and Ti L-edge absorption spectroscopy and the information about the crystal field and spin-orbit splitting confirmed TiN phase formation. In essence, through this work, we demonstrate the role of <math><</math>Esp> and Ti interface in achieving highly dense and smooth TiN thin films with low resistivity without the need of a high temperature or substrate biasing during the thin film deposition process.

In Situ Scanning Tunneling Microscopy Studies of the Evolution of Surface Morphology and Microstructure in Epitaxial TiN(001) Grown by Ultra-High-vacuum Reactive Magnetron Sputtering

Morphology of Epitaxial Tin(001) Grown by Magnetron Sputtering

Nucleation Kinetics During Homoepitaxial Growth of Tin(001) by Reactive Magnetron Sputtering

Effects of High-Flux Low-Energy Ion Bombardment on the Low-Temperature Growth Morphology of Tin(001) Epitaxial Layers

Nucleation Kinetics Versus Nitrogen Partial Pressure During Homoepitaxial Growth of Stoichiometric Tin(001): A Scanning Tunneling Microscopy Study

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

Heteroepitaxial growth of TiN film on MgO (100) by reactive magnetron sputtering

A Molecular Dynamics Simulation of TiN Film Growth on TiN(0 0 1)

Characterization and In-situ Monitoring of Sub-stoichiometric Adjustable Tc Titanium Nitride Growth

Epitaxial growth of TiN on (0001) semi-insulating 4H-SiC substrate by reactive sputtering

Evolution of Chemical, Structural, and Mechanical Properties of Titanium Nitride Films with Different Thicknesses Fabricated Using Pulsed DC Magnetron Sputtering

Growth and mechanical anisotropy of TiN thin films

Epitaxial growth and microstructure of TiN/CrO N periodic multilayers

Microstructure and Properties of (ti,al) N Coating

Morphological, Mechanical Property Analysis and Comparative Study over Structural Properties of CVD TiN Film Grown under Different Substrate Temperature in Nitrogen Gas Atmosphere

Heteroepitaxial Growth of TiN Thin Films on Si Substrates for MEMS Applications

Microstructure, interface and hardness of Ti/TiN nanolayered coatings

Ti/TiN multilayer coatings: deposition technique, characterization and mechanical properties

Synthesis and study of highly dense and smooth TiN thin films

Research on Microstructure and Properties of TiN, (ti, Al)N and TiN/(Ti, Al)N Multilayer Coatings

Remote plasma-enhanced atomic layer deposition of metallic TiN films with low work function and high uniformity