Abstract:The wall thickness of turbine blade is becoming thinner because of the need for cooling, which leads to the thickness debit effect. The microstructure evolution along the thickness is deemed one of the major factors. The present work quantitatively investigates the microstructure evolution along the thickness of a second generation nickel-based single crystal superalloys DD6 under pure thermal condition. Experiments are performed on specimens with thickness of 0.3 mm, 0.6 mm and 1.5 mm. Microstructure is analyzed using scanning electron microscopy (SEM) in combination with quantitative image analysis. The interplay of oxidation and substrate causes apparently different microstructures along the thickness which are classified into three layers except the base material layer. The growth of each layer is barely influenced by the specimen thickness and their evolutions with time are fitted by both logarithmic and power equations. The microstructure along the thickness is not obvious different in the base material layer by naked eyes. Quantitative analysis of the average size and probability distribution function of the gamma' particle area and circularity reveals the variation of microstructure along the thickness. The average size of the gamma' particle area increases with the increase of the distance from the thickness symmetry axis. The average value of circularity at the position with the same distance from the thickness symmetry axis is larger in the thin specimen than that in the thick specimen, which represents more severe rafting in the thin specimen. A diffusional mechanism is used to interpret the observed microstructure changes at the base material layer. The new findings are important for mechanical performance analysis of thin-walled structure in turbine blade applications.

Microstructural Stability of Single Crystal Superalloy DD402 and Its 1st Stage Turbine Blades

Microstructure Degradation of Service-Exposed Turbine Blades Made of Directionally Solidified DZ125 Superalloy

Degradation Behavior of Microstructures and Mechanical Properties of GTD111 Turbine Blade After Long-Term Service

Dependence of Microstructural Evolution on the Geometric Structure for Serviced DZ125 Turbine Blades

B22-P-17Evolution of the MC Carbide in Nickel-base Single Crystal Superalloy Exposing at 950 °C

The Unique Influence of 1000°C High-Speed Rotation Simulated Turbine Blade Working Conditions on Microstructural Degradation of Single-Crystal Superalloy Nialreru

Effect of Overheating Treatment on Microstructure and Stress Rupture Properties of a Nickel-Based Single-Crystal Superalloy

Microstructure and mechanical degradation of K403 Ni-based superalloy from ultra-long-term serviced turbine blade

Deformation mechanisms of low cycle fatigue of a fourth generation Ni-based single crystal superalloy

Microstructural Evolution and Compositional Homogenization of a Low Re-bearing Ni-based Single Crystal Superalloy During Through Progression of Heat Treatment

Degradation and Dislocation Evolution of the Nickel-Based Single Crystal Superalloy DD6 under the Coupling High-Speed Rotating and High Temperature Environments

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Probing the failure mechanisms and microstructure evolution of a high-pressure turbine blade coated with AlSiY

2D and 3D characterization of oxidation‐fatigue mechanisms in an advanced Ni‐based superalloy: Effects of microstructure and elevated temperature

Microstructure and Mechanical Property of a Directional Ni-Based Superalloy During Long-Term Exposure

Quantitative Study of the Microstructure Evolution along the Thickness Direction in the Nickel-Based Single Crystal Superalloy DD6 at 1323 K Thermal Exposure

Thermomechanical fatigue behavior and failure mechanism of a nickel-based directional solidification column crystal superalloy

Microstructural Rejuvenation in a Ni-based Single Crystal Superalloy

Competitive Cracking Behavior and Microscopic Mechanism of Ni-based Superalloy Blade Respecting Accelerated CCF Failure

Direct Investigation on High Temperature Tensile and Creep Behavior at Different Regions of Directional Solidified Cast Turbine Blades

On the effect of long service exposure: changes in microstructure and mechanical properties of Ni-based superalloy