On the effect of long service exposure: changes in microstructure and mechanical properties of Ni-based superalloy

Hassan Keyvanlou,Reza Soleimani Gilakjani,Majid Nezakat
DOI: https://doi.org/10.1051/metal/2020080
2020-01-01
Abstract:In the present study, the microstructure and the mechanical properties of GTD-111 nickel-based superalloy were investigated. The alloy was in service as the GE-MS9001 gas turbine 1st stage rotating blade for 105,000 hours at a temperature between 950 to 1000 °C. Two sets of samples were extracted from the airfoil and the root of the blade. Then, they were compared for the microstructural and the mechanical properties changes after the high temperature service. Stress-rupture and Charpy V-notch (CVN) tests were conducted on the samples at 871 °C and two temperatures of 25 and 900 °C, respectively. The microstructure and the fracture surface of the samples were analyzed using a scanning electron microscope (SEM). The results showed degradation in the microstructure and the mechanical properties of the airfoil compared to those of the root due to the long-term service at elevated temperatures. The loss in mechanical properties was due to the coarsening of γ ’ precipitates and the formation of brittle phases in the grain boundaries.
metallurgy & metallurgical engineering
What problem does this paper attempt to address?