Abstract:Fluid catalytic cracking (FCC) is the workhorse of modern crude oil refinery. Its regenerator plays a critical role in optimizing the overall profitability by efficiently restoring the catalyst activity and enhancing the heat balance in the riser reactor. Improvement in the device metallurgy and process operations have enabled industrial regenerators to operate at high temperatures with a better coke burning rate and longer operating cycle. Today, the carbon content of regenerated catalyst has drastically reduced to less than 0.1 wt.%. However, the unit is still plagued with operational complexities and insufficient understanding of the underlying dynamic, multiscale intricacies. Recent process-intensification strategies provide insights into regenerator performance improvement potentials. In this review, the importance of the uniform distribution of spent catalysts through structural modification and operational manipulations of the catalyst distributor is discussed. The knowledge of the role of baffles in enhancing excellent gas–solid interaction has been increasing, but skepticism due to its complex hydrodynamic effects on gas–solid flows fends off operators from its application, a critical evaluation of its implication in the regenerators is covered. The understanding of the contribution of air/steam distributor design and feed gas injection techniques for even contact with spent catalyst leading to the improvement in FCC performance is also investigated. The reliability of FCC components is equally a big concern, as unplanned shutdown and enormous economic losses are being witnessed due to device failure. To this end, mitigation approaches to damaging afterburn and high-temperature erosion problems with respect to process control and geometric adjustment in the bed, freeboard, cyclone separators and collection ducts are explored. Emission limits for fluid catalytic cracking unit (FCCU) and products are consistently ratcheting downward; the commingled turnkey solutions to reducing pollutants generation are also reviewed.

Application of Oxygen Enrichment Regeneration Technology to FCC Unit

State-of-the-Art Review of Fluid Catalytic Cracking (FCC) Catalyst Regeneration Intensification Technologies

Influences of Regeneration Atmospheres on Structural Transformation and Renderability of Fluidized Catalytic Cracking Catalyst

REVAMPING OF FCC UNIT WITH CSC RAPIDSEPARATION TECHNOLOGY

A multistage NOx reduction process for a FCC regenerator

A novel multi layer and multi zone redox FCC regenerator design for removing NOx gas system

Discussion on Improving Regeneration System of Fluid Catalytic Cracking Unit

Study on emission factors of FCC flue gas pollutants in petroleum refineries

Experimental Study And Analysis Of Coal Combustion On A Cfb Test-Facility In O-2/Co2 And O-2/N-2 Mixtures

Optimization of oxy-fuel circulating fluidized bed combustion system with high oxygen concentration

Optimization of Oxygen-based CFBC Technology with CO2 Capture

Characteristics of Pore Structure Evolution of Spent Fcc Catalyst and Its Effect Mechanism on Regeneration at Different Atmospheres

NO Reduction by CO over a Fe-based Catalyst in FCC Regenerator Conditions

Regeneration and application of FC-18

Regeneration of full-scale commercial honeycomb monolith catalyst (V 2 O 5 –WO 3 /TiO 2 ) used in coal-fired power plant

Enhanced NO X Removal Performance and Microbial Community Shifts in an Oxygen-Resistance Chemical Absorption–biological Reduction Integrated System

Sinopec Zhongyuan Oil Field Company Refinery CCS-EOR Project

Fundamental and Technical Challenges for a Compatible Design Scheme of Oxyfuel Combustion Technology

Effect of flow patterns in the recirculation catalyst standpipe on the performance of FCC high-efficiency regenerator

Regeneration and Application of FC-18 Catalyst

A novel approach to CO2 capture in Fluid Catalytic Cracking—Chemical Looping Combustion