Abstract:The emission of nitrogen oxides (NO x ) from the coal-fired power plants poses a huge threat to human health and natural environment. The selective catalytic reduction of NO x with NH3 (SCR) has been proven to be a mature technology for the abatement of NO x . To be the crucial component, the performance of the catalysts plays a determined role during the deNO x process. Fe2O3-based catalysts, as one of the most effective catalysts for SCR, have been comprehensively researched and fruitful results are achieved. Therefore, the advances in the applications of Fe2O3-based catalysts for NO x reduction was overviewed in this work. Simply put, the fundamentals of Fe2O3, such as this metal oxide's crystal structures and the corresponding preparation methods, were first introduced. After that, the physicochemical features and deNO x performances of various catalysts, including virgin Fe2O3, Fe2O3-supported, and Fe2O3-containing mixed oxide systems, were summarized. Considering the variable flue gas conditions in coal-fired power plants, the effects of the typical components of SO2, HCl, H2O, and fly ash on the catalyst's NO x reduction activity were also evaluated and the results demonstrated that with proper modification, catalyst flue gas component adaptability could be availably improved. Furthermore, the possible NO x reduction pathways over the Fe2O3-based catalysts under various conditions were discussed with the key intermediates and the rate-controlling stages clarified. Finally, suggestions were raised that attention needed to be concentrated on developing new Fe2O3-based catalysts that was capable of stably operating in real coal-fired flue gas in following research.

NO Reduction by CO over a Fe-based Catalyst in FCC Regenerator Conditions

Experimental and Modeling Analysis of NO Reduction by CO for a FCC Regeneration Process

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

A multistage NOx reduction process for a FCC regenerator

A novel multi layer and multi zone redox FCC regenerator design for removing NOx gas system

Recent advancements in Fe-based catalysts for the efficient reduction of NOx by CO

Highly active and stable Cu Fe /AC-H catalysts with CuFe2O4 for NO reduction by CO in the presence of H2O and SO2 under regeneration gas

Density Functional Theory Study on the Reduction of NO by CO over Fe3O4 (111) Surface

Investigation on the No Reduction with Coal Char and High Concentration Co During Oxy-Fuel Combustion

Simultaneous catalytic reduction of NO and SO2 with CO over Fe/γ-Al2O3 catalysts

Simultaneous removal of SO2 and NO by CO reduction over prevulcanized Fe2O3/AC catalysts

NO Heterogeneous Reduction on Semi-Coke and Residual Carbon with the Presence of O2 and CO

Enhanced Low-Temperature Behavior of Selective Catalytic Reduction of Nox by Co on Fe-Based Catalyst with Looping Oxygen Vacancy

The development of Fe2O3-based catalysts used for the selective catalytic reduction of NO with NH3: A review

Superior Room-Temperature Efficacy of Selective Catalytic Reduction of NO X by CO Utilizing Metal-Modified Fe 2 O 3 Catalysts

Recent advances in NO reduction with CO over copper-based catalysts: reaction mechanisms, optimization strategies, and anti-inactivation measures

Co Single Atoms and CoOx Nanoclusters Anchored on Ce0.75Zr0.25O2 Synergistically Boosts the NO Reduction by CO

The Catalytic Effect of Fe on Char-NO Reactions at High-Temperatures

Study On N2o Reduction With Synthetic Coal Char And High Concentration Co During Oxy-Fuel Combustion

Reduction of No by Low-Volatile Coal Chars with or Without Catalyst Addition

Recent Advances of Cu-Based Catalysts for NO Reduction by CO under O2-Containing Conditions