Abstract:Fluid catalytic cracking (FCC) is the workhorse of modern crude oil refinery. Its regenerator plays a critical role in optimizing the overall profitability by efficiently restoring the catalyst activity and enhancing the heat balance in the riser reactor. Improvement in the device metallurgy and process operations have enabled industrial regenerators to operate at high temperatures with a better coke burning rate and longer operating cycle. Today, the carbon content of regenerated catalyst has drastically reduced to less than 0.1 wt.%. However, the unit is still plagued with operational complexities and insufficient understanding of the underlying dynamic, multiscale intricacies. Recent process-intensification strategies provide insights into regenerator performance improvement potentials. In this review, the importance of the uniform distribution of spent catalysts through structural modification and operational manipulations of the catalyst distributor is discussed. The knowledge of the role of baffles in enhancing excellent gas–solid interaction has been increasing, but skepticism due to its complex hydrodynamic effects on gas–solid flows fends off operators from its application, a critical evaluation of its implication in the regenerators is covered. The understanding of the contribution of air/steam distributor design and feed gas injection techniques for even contact with spent catalyst leading to the improvement in FCC performance is also investigated. The reliability of FCC components is equally a big concern, as unplanned shutdown and enormous economic losses are being witnessed due to device failure. To this end, mitigation approaches to damaging afterburn and high-temperature erosion problems with respect to process control and geometric adjustment in the bed, freeboard, cyclone separators and collection ducts are explored. Emission limits for fluid catalytic cracking unit (FCCU) and products are consistently ratcheting downward; the commingled turnkey solutions to reducing pollutants generation are also reviewed.

Effect of flow patterns in the recirculation catalyst standpipe on the performance of FCC high-efficiency regenerator

Optimizing Flow Field in an SCR System of a 600 MW Power Plant: Effects of Static Mixer Alignment Style

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Discussion On Critical Frequency Of Flow Pattern In Regenerator

State-of-the-Art Review of Fluid Catalytic Cracking (FCC) Catalyst Regeneration Intensification Technologies

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Discussion on Improving Regeneration System of Fluid Catalytic Cracking Unit

Control of Pressure Balance and Solids Circulation Characteristics in DCFB Reactors

CFD–DEM Simulation of Gas–solid Reacting Flows in Fluid Catalytic Cracking (FCC) Process

Study on the flow and collision characteristics of catalyst particles in FCC reactor

CFD-DEM Simulation of Gas-Solid Reacting Flows in Catalytic Reactor

Characteristics of Steady and Oscillating Flows Through Regenerator

Numerical exploration of the flow regime transition of a novel catalytic cracking reactor and operation mode analysis

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in Fcc Riser Reactors (ii) Numerical Simulation on the Gas-Solid Two-Phase Turbulent Flow

Study on the FCC process of a novel riser-downer coupling reactor (III): Industrial trial and-CFD modeling

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

Numerical simulation of gas-particle flows in a fluid catalytic cracking riser

Understanding Riser and Downer Based Fluid Catalytic Cracking Processes by A Comprehensive Two-Dimensional Reactor Model

THE APPLICATION OF THE DENSE GAS THEORY FOR THE NUMERICAL SIMULATION OF FCC RISER REACTOR

A Gas-solid two-phase flow-reaction model of FCC riser reactors and numerical simulation for them: I . Development of the gas-solid two-phase flow-reaction model

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in Fcc Riser Reactors (I) Turbulent Gas-Solid Flow-Reaction Model