Abstract:As a classic bridge type, cable-stayed bridge is widely used because of its superior spanning capacity. Based on the mechanical characteristics of stay cable supporting deck, we propose a novel mechanical model aiming to evaluate the vertical bending stiffness of a floating cable-stayed bridge, namely, multi-beam model with discrete springs. First, a single-tower cable-stayed bridge is modeled as a triple-beam model with discrete springs in order to introduce the novel method easily. In this model, the stay cables are simplified as springs without mass and the single tower is regarded as an Euler–Bernoulli beam with consideration of the effect of axial force. At the same time, the bridge deck has been cut into two Euler–Bernoulli beams at the intersection of a deck and a tower. Then equations governing vibrations of the beam and tower are derived according to Hamilton’s principle for dynamic problems in elastic body under equilibrium state. The program is established by transfer matrix method to solve the eigenvalues of the system along with its boundary and matching conditions. Thus, the vertical bending stiffness of the floating cable-stayed bridge can be evaluated based on the frequency. In addition, the influences of the cables’ material, location, stiffness and number on vertical bending stiffness are analyzed in detail when the steel cables are replaced with CFRP cables. Lastly, the same method is directly extended to modeling the floating multi-tower cable-stayed bridge. The results, which are validated by commercial finite element software, demonstrate that the proposed mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

Design Method of Small-scale Cable-stayed Bridge Based on Stiffness Similarity Theory

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

Model Experiment on the Static Behaviors of a Crescent-Shaped Cable-Truss Canopy Structure

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF TOWER OF CABLE STAYED BRIDGE OF THE SECOND YANGTZE RIVER BRIDGE IN NANJING

Safety Assessment of Large Span Cable-stayed Bridge

SCHEME COMPARATION OF STRENGTHENING CONTINUOUS PRESTRESSED CONCRETE BOX GIRDER BRIDGE BY EXTERNAL PRESTRESSED CABLE

Assessment of cable tension condition based on optimum cable tension of cable-stayed bridge

Analytical Model for Early Design Stage of Cable-Stayed Suspension Bridges Based on Hellinger-Reissner Variational Method

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method

Dynamic Assessment of Curved Cable-Stayed Bridge by Model Updating

Structural performance degradation of cable-stayed bridges subjected to cable damage: model test and theoretical prediction

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Analytical Determination of Static Deflection Shape of an Asymmetric Extradosed Cable-Stayed Bridge Using Ritz Method

Deformation and internal force of multitower suspension bridges: Numerical modeling and analytical analysis

Study On Optimal Construction Method For Lower Beam Of Cable-Stayed Bridge Towers