Abstract:A low-density, high-specific surface area, high-strength and large-sized carbon aerogel preparation process is a key technology in the industrial application of aerogel science. In recent years, ingenious nanostructure design, along with salt templates, drying optimization and other strategies have been applied by numerous scientists. As a result, the specific surface area of carbon aerogel has significantly increased and the density reduced. However, the preparation of high-strength and large-sized intact carbon aerogel at low cost is still a challenge due to the limitations of thermal treatment equipment and drying process. In this study, we propose an improved preparation method of ambient pressure solvothermal polymerization and auxiliary ambient pressure drying by the principle of acid–base two-step catalysis using resorcinol and furfural as raw materials. Resultantly, the condensation and cross-linking reaction process is stabilized by the ambient pressure solvothermal polymerization, which effectively reinforces the interfacial bonding between primary particles and forms a high-strength skeleton. The breaking strength of the aerogels reach up to 9.74 MPa. The auxiliary ambient pressure drying can greatly reduce the drying shrinkage and density of the aerogel and solve the problems of drying deformation and cracking of large-sized carbon aerogel. The drying shrinkage and density of the obtained carbon aerogels are reduced to 3.22% and 0.203 g/cm 3 , respectively, and the specific surface area reaches 675.057 m 2 /g. Moreover, the large-sized sample (70 mm (d) × 25 mm (h)) can also be prepared by this method since the strength of skeleton can resist the capillary force of pore structure, and the nanoporous architecture can be perfectly retained. Therefore, this study provides a new preparation scheme for the industrial large-scale production and application of carbon aerogel.

Preparation and Electrochemical Properties of Vanadium Pentoxide Aerogel Film Derived at the Ambient Pressure

Preparation and Heat Treatment of Titania Aerogels by Ambient Pressure Drying

High-Surface Vanadium Oxides with Large Capacities for Lithium-Ion Batteries: from Hydrated Aerogel to Nanocrystalline Vo2(B), V6o13 and V2o5

The Structure and Electrochemical Performance of V2O5 Powder Prepared by Hydrothermal Synthesis at Various Acidification Conditions

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Low Temperature Synthesis of Vanadium Pentoxide Nanocrystallines by Sol-Gel Method

Porous vanadium nitride nanoribbon aerogel and its electrochemical properties

STUDY OF THE ELECTRICAL PROPERTIES OF SOL-GEL-DERIVED TITANIUM-VANADIUM OXIDE FILMS

Nanocomposites of V2o5 Aerogel and Ruo2 As Cathode Materials for Lithium Intercalation

Preparation and characterization of thermally stable high surface area mesoporous vanadium oxides

A Water Based Synthesis of Ultrathin Hydrated Vanadium Pentoxide Nanosheets for Lithium Battery Application: Free Standing Electrodes or Conventionally Casted Electrodes?

Ultrasmall, Amorphous V2O3 Intimately Anchored on a Carbon Nanofiber Aerogel Toward High-Rate Zinc-Ion Batteries

Facile Preparation of V2O5 Hollow Microspheres with Mesoporous on the Shell and Their Electrochemical Properties for Lithium-Ion Batteries

Synthesis of Hydrophobic Silica Aerogels via Ambient Pressure Drying

Correlating Lithium Hydroxyl Accumulation with Capacity Retention in V2O5 Aerogel Cathodes.

Optical and electrical properties of vanadium oxides synthesized from alkoxides

Fabrication and property of hydrophobic polyvinyl alcohol /clay aerogel via irradiation-crosslinking and ambient-drying

Vanadium Pentoxide Nanobelts and Nanorolls: from Controllable Synthesis to Investigation of Their Electrochemical Properties and Photocatalytic Activities

Amorphous Vanadium Oxide Thin Films as Stable Performing Cathodes of Lithium and Sodium-Ion Batteries

Carboxymethyl cellulose mediated growth of V2O5 nanorod by green strategy for energy storage utilization using electrochemical studies

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying