Abstract:Prebored precast pile with an enlarged base (PPEB pile) is a new type of green and environmental protection pile foundation developed in China in recent years, which has complex bearing characteristics and many influencing factors. Based on the static load tests and key parameters’ tests in deep soft soil in Shanghai, a three-dimensional numerical analysis model was established using ABAQUS finite element software. The transfer law of load among the precast pile, cement soil, and soil around the pile and the action mechanism of the enlarged base were analyzed emphatically, and a sensitivity analysis of the main factors affecting the bearing performance was carried out. The calculation results show that the existence of the enlarged base can greatly improve the compressive bearing capacity, increasing the diameter and height of the enlarged base is beneficial to the bearing capacity, and the influence of the diameter expansion ratio is more effective. With the increase of the proportion of nodular piles, the ultimate bearing capacity increases slightly, but the deformation increases obviously. Under the condition of cement soil of the test piles, the spacing of the neighboring nodules of nodular piles has no obvious effect on the bearing capacity, and the 1 m spacing commonly used in engineering applications can be optimized. The increase of cement soil thickness is beneficial to the improvement of pile bearing capacity, but the efficiency is low. Finally, some improvement measures for the construction technology of the PPEB pile were put forward.

Pile Bearing Capacity Numerical Calculation Method Based on Energy Difference Equation

A NEW CALCULATION METHOD FOR LARGE-DIAMETER-TUBULAR-PILE BEARING CAPACITY

Calculation Method for Ultimate Bearing Capacity of Structure and Its Convergence

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

3-D Numerical Simulation for Large-Diameter Cast-<i>In Situ</i> Tubular Pile

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

3-D Numerical Simulation for Large-Diameter Cast-In-Situ Tubular Pile

A P-Y Curve Method for Horizontal Bearing Characteristics of Single Batter Pile in Sands

Calculation Method of Uplift Capacity of Pile-Anchor Composite Foundation and Influence of Parameters

CALCULATION MODEL OF DOUBLE-ROW STABILIZING PILES BASED ON DISPLACEMENT OF SOIL AROUND PILES

Comparison of Different Methods for Calculation of Pile End Bearing Capacity in Sand

ANALYSIS ON BEARING CAPACITY OF DIVING DRY-VIBRATION COMPACTION STONE PILES

Model Test on Bearing Characteristic of Static Drill Rooted Energy Pile

A Calculation Method of Bearing Capacity of Single Squeezed Branch Pile Based on Load Transfer Method

A Temperature Propagation Calculation Method of Slender Energy Pile and Surrounding Soil Based on the Infinite Line Source Model

Finite Element Analyses of Bearing Performance of Energy Pile Based on TTS Model

A New Method for Analyzing the Thermomechanical Behavior and the Null Point Movement of Energy Piles

Analysis Of Deformation And Internal Force For Single Pile Under Combined Vertical And Lateral Loads Considering Yielding Of Soil

Dynamic Impedances and Free-Field Vibration Analysis of Pile Groups in Saturated Ground

Numerical Analysis of Bearing Behavior of the Prebored Precast Pile with an Enlarged Base