Abstract:Aluminum (Al) and lithium borohydride (LiBH4, LB for short) are highly promising candidates for chemical hydrogen storage. However, the direct utilization of Al-H2O reaction faces significant challenges due to the inherent issue of surface passivation, which prevents the ongoing reaction between Al and H2O. Additionally, the hydrolysis of LB is constrained to temperatures exceeding 0 °C, and the development of cost-effective catalysts that enable efficient hydrogen release from LB hydrolysis remains a bottleneck in realizing its practical application. Herein, we present an efficient noncatalytic hydrogen generation system utilizing Al and LB mixtures, enabling H2 production over a broad temperature range using methanol, ethanol, or their mixtures as reaction solvents. Our results demonstrate that the H2 generation kinetics of Al-LB composites can be precisely tailored by adjusting various parameters, such as LB content, ball-milling time, reaction temperature, and solution composition. In comparison with the traditional Al and its alloy systems, Al-LB composites exhibit remarkable performance in both hydrogen capacity and H2 kinetics. For instance, the Al-50% LB composite achieves a hydrogen yield of 2322 mL·g-1 H2 within 5 min (∼80% fuel conversion). Specifically, with a 70% LB content, the composite generates over 3100·mL·g-1 H2 within the same time, realizing nearly 90% fuel conversion. Notably, the apparent activation energy of the Al-30% LB and Al-50% LB composites is determined to be 29.1 kJ mol-1 and 13.9 kJ mol-1, much lower than that of Al-based hydrolyzable materials. These findings hold significant importance for the advancement of practical Al-based hydrogen generation systems designed for mobile or portable applications.

Feasibility Study of Hydrogen Generation from the Milled Al-Based Materials for Micro Fuel Cell Applications

Hydrolysis of ball milling Al–Bi–hydride and Al–Bi–salt mixture for hydrogen generation

In situ hydrogen production from Al–BiCl 3 hydrolysis for small-sized fuel cell

Study on Hydrogen Generation from the Hydrolysis of a Ball Milled Aluminum/calcium Hydride Composite

Hydrogen Generation and Stoichiometric Hydrolysis of Core–shell Al-Li-NaBH4 Composite

Improved Hydrogen Generation from the Hydrolysis of Aluminum Ball Milled with Hydride

Hydrogen Generation from the Reaction of Al-based Composites Activated by Low-Melting-point Metals/oxides/salts with Water

Investigation on the Improved Hydrolysis of Aluminum–calcium Hydride-Salt Mixture Elaborated by Ball Milling

Instant Hydrogen Production Using Ga-In-Sn-Bi Alloy-Activated Al-water Reaction for Hydrogen Fuel Cells

Effect of Salts Addition on the Hydrogen Generation of Al–LiH Composite Elaborated by Ball Milling

Mild hydrogen production from the hydrolysis of Al–Bi–Zn composite powder

Efficient Hydrogen Generation from Noncatalytic Alcoholysis of Al/LiBH4 Mixture for Fuel Cell Applications

Hydrogen generation from the hydrolysis of Mg powder ball-milled with AlCl3

Enhanced Hydrogen Generation Performance of Al-Rich Alloys by a Melting-Mechanical Crushing-Ball Milling Method

Development of Cost-Effective Sn-Free Al-Bi-Fe Alloys for Efficient Onboard Hydrogen Production through Al–Water Reaction

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Design and Fabrication of High Activity Retention Al-Based Composite Powders for Mild Hydrogen Generation

Preparation of Al-3Ga-3In-3Sn Alloy Powder by Coupling Alloying and Ball Milling and Its Application on High-Rate Hydrogen Generation at Room Temperature

Hydrogen Generation from Mg–LiBH4 Hydrolysis Improved by AlCl3 Addition

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals