Abstract:Titanium metal is primarily produced via the Kroll process, which is characterized by a semi-continuous production flow and a lengthy process cycle, resulting in high production costs. Researchers have explored alternative methods for titanium production, including molten salt electrolysis, such as the Fray–Farthing–Chen (FFC), Ono Suzuki (OS), and University of Science and Technology Beijing (USTB) processes, aiming to achieve more economical production. Among these, the USTB process, a representative of soluble anode electrolysis, has shown significant promise. However, controlling oxygen concentration in titanium produced by soluble anode electrolysis remains a challenge. This study proposes a novel approach to enhance deoxidation efficiency in soluble anode electrolysis for titanium production by introducing yttrium chloride (YCl3) into the molten salt electrolyte. Thermodynamic analysis and experimental validation demonstrate that the theoretical deoxidation limit for titanium can reach below 100 ppm under Y/YOCl/YCl3 equilibrium. We report the successful synthesis of titanium powder with an oxygen concentration of 6000 ppm from titanium-carbon-oxygen solid solution. Under optimized conditions, the purity of the titanium powder reached 99.42%, demonstrating a new approach for producing high-purity titanium. This method, based on soluble anode electrolysis, offers a potential alternative to the conventional Kroll process. The research elucidates the fabrication process and analytical methods for titanium-carbon-oxygen solid solution, and employs a combination of analytical techniques, including XRD, SEM-EDS, and ONH Analyzer, for characterization of the electrolytic product, encompassing phase analysis, microstructure, and oxygen concentration testing.

Electrodeposition of Titanium from an Ionic Liquid

Electrochromism of titanium oxide thin films

Electrodeposition of Titanium Aluminide (TiAl) Alloy from AlCl3–BMIC Ionic Liquid at Low Temperature

Electrodeposition of titanium from chloride melts

Preparation of Titanium Deposit in Chloride Melts

Anodic behavior in AlCl3-EMIC ionic liquid of Ti6Al4V alloy and its application for enhancing the adhesion strength of aluminum coatings

Influence of Pulse Parameters on Electrodeposition of Titanium from NaCl-KCl-TiCl2 Melt

Equilibrium between titanium ions and high-purity titanium electrorefining in a NaCl-KCl melt

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Formation of Titanium Oxide on Nonmetal Substrates and the Coordination Structure of Titanium Ions in Molten Lif-KF

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Local Fine Structural Insight into Mechanism of Electrochemical Passivation of Titanium.

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

The electrodeposition of aluminum on TiB2/A356 composite from ionic liquid as protective coating

Fabrication And Characterization Of Titanium-Based Lead Dioxide Electrode By Electrochemical Deposition With Ti4o7 Particles

Direct electrochemical reduction of low titanium chlorides into titanium aluminide alloy powders from molten eutectic KCl–LiCl–MgCl2

Low Temperature Electrodeposition of Titanium in Fluoride-Added LiCl–KCl–CsCl Molten Salt

Fabrication and characterization of titanium‐based lead dioxide electrode by electrochemical deposition with Ti <sub>4</sub> O <sub>7</sub> particles

Direct selective extraction of titanium silicide Ti5Si3 from multi-component Ti-bearing compounds in molten salt by an electrochemical process

Study on Titanium Foil Coated with Partial Reduction Titanium Dioxide As Bipolar Lead-Acid Battery's Substrate

Pulse electro-deposition of TiB 2 onto graphite from TiO 2-B 2O 3-KF-LiF melts