Abstract:The residual interfacial stress plays an important role in crack initiating and propagating along the interface, which could result in delamination failure of the thermal barrier coatings (TBCs). In this study, the finite element model of air plasma spraying(APS) TBCs was established to assess the level and distribution of residual stress along top coat(TC)/thermally grown oxide (TGO) and bond coat (BC)/TGO interfaces under thermal cycles. Instead of using vertical stress S22 in global coordinate system, the normal and tangential components in the local system along the interfaces, transformed from stress components S11, S22, and S12 in the global one, were used to evaluate the way the cracks initiate and propagate along the interfaces. Firstly, the effect of the number of thermal cycles on residual stress was investigated. It was found that, for the TBCs model without TGO growth and crack, the impact of the number of thermal cycles on the stress is very insignificant and could be ignored. So the present study only chose to focus on the first thermal cycle. Then the influence of the TGO thickness and the interface amplitude on the normal and tangential residual stresses for both homogeneous and inhomogeneous temperature fields was explored. The results show that the TGO thickness, interface amplitude and temperature field affect the residual stress level and distribution, leading to different fracture mechanisms along TC/TGO and TGO/BC interfaces. Finally, the difference between the vertical stress in the global coordinate system and the normal stress in the local coordinate system was studied. Compared with vertical stress S22, the stress components normal and tangential to the TC/TGO and TGO/BC interfaces are more appropriate to describing the stress distribution along the interfaces and predicting the propensity of crack initiating and propagating along the interfaces.

Residual Stress Measurement of Thermal Barrier Coatings

OS13F106 Progress of the Residual Stress Measuring Techniques of Thermal Barrier Coatings

Investigation on Residual Stress of Plasma Sprayed Thermal Barrier Coatings Based on Moire Interferometry and Hole Drilling Method

Numerical and Experimental Investigation of Residual Stress in Thermal Barrier Coatings During Aps Process

Nondestructive Measurements of Residual Stress in Air Plasma‐sprayed Thermal Barrier Coatings

Measurement of Young's Modulus and Poisson's Ratio of Thermal Barrier Coatings

Residual Stresses in Thermal Barrier Coatings Measured by Photoluminescence Piezospectroscopy and Indentation Technique

High Temperature In-Situ Synchrotron X-Ray Diffraction Technique of Thermal Barrier Coatings under Thermal Gradient and Mechanical Loads

Experimental Investigation of Residual Thermal Stress in Thermal Barrier Coating (Tbc)

Cross-Sectional Residual Stresses in Thermal Spray Coatings Measured by Moiré Interferometry and Nanoindentation Technique

Stress among the APS-Prepared TBCs: Testing and Analysis

Simulation of Residual Stresses and Their Effects on Thermal Barrier Coating Systems Using Finite Element Method

Interfacial Residual Stress Analysis of Thermal Spray Coatings by Miniature Ring-Core Cutting Combined with DIC Method

Residual Stress Trend in Thermal Barrier Coatings in Through Thickness Direction Measured by Photoluminescence Piezospectroscopy

RESEARCH PROGRESS ON THE EXPERIMENTAL MEASUREMENT METHODS OF MECHANICAL PROPERTIES OF THERMAL BARRIER COATINGS

Measurement of the Elastic Modulus and Residual Stress of Thermal Barrier Coatings Using a Digital Image Correlation Technique

Effect of Material Properties on Residual Stress Distribution in Thermal Barrier Coatings

Residual Stress Distribution along Interfaces in Thermal Barrier Coating System under Thermal Cycles

Precise Strain Profile Measurement As a Function of Depth in Thermal Barrier Coatings Using High Energy Synchrotron X-rays

Evolution of Residual Stresses in PS-PVD Thermal Barrier Coatings on Thermal Cycling