Abstract:The recent developments in analysis and testing of spot welds are briefly reviewed in general and the solutions, stress formulas and strain gauge techniques that may be applied to the analysis and testing are elaborately introduced in particular. The local stress parameters such as notch stress, stress intensity factors and J-integral at a spot weld are generally expressed by the structural stresses around the spot weld. The determination of these parameters are then simplified as determining the structural stresses that can be calculated by a spoke pattern for spot welds in finite element analysis. The approximate stress formulas for the structural stress, notch stress and stress intensity factor are given for common spot-welded specimens. With the aid of the formulas the test data in terms of the original load can be easily transformed into the data in terms of the structural stress, notch stress or stress intensity factor at the spot weld. The formulas also facilitate the transfer of the test data across different specimens. The strain gauge technique developed for a tensile-shear specimen shows that all the structural stress, notch stress, stress intensity factors and J-integral at the spot weld can be determined by two strain gauges attached only to the outer surface of one sheet. The results presented here should be helpful for the analysis and testing of spot welds and for developing measuring methods for spot welds.

ASSESSMENT OF STRESS INTENSITY FACTOR OF SPOT WELDING JOINTS USING ENRICHED EFGM

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Hot Spot Stress Approach For Fatigue Life Assessment In Welded Bridge Connections Using Monitoring Data And Fem Analysis

A Method for Estimation of Critical Stress Intensity Factor for Welded Sheet

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

A Strain Gauge Method for Spot Weld Testing

Fracture mechanics solutions to spot welds

Fatigue Life Assessment Of Welded Structures By Effective Notch Stress Approach

Stress Intensity Factors for Spot Welds Joining Sheets of Unequal Thickness

A Fatigue Life Prediction Approach for Resistance Spot Welded Joints with Consideration of the Stress Ratio Effect

Calculation of Stress Intensity Factors of Surface Cracks at Weld Toe of Longitudinal Stiffener Joints in a Container

3D finite element analysis and optimization of welding residual stress in the girth joints of X80 steel pipeline

Recent developments in analysis and testing of spot welds

Residual Notch Stress Intensity Factor assessment via 3D welding numerical simulation: influence of power input

Parametric studies of stress intensity factors with varied steel frame connection geometry

Effect of Loading Methods on the Fatigue Properties of Dissimilar Al/Steel Keyhole-Free FSSW Joints

Fatigue strength estimation of butt-welded joints between cast-steel and hot-rolled-steel plates

Finite Element Fracture Mechanics Study of Pre-Northridge Connections

Numerical Study on Stress Intensity Factors for Stud Connectors of Steel–Concrete Connection

On the fatigue resistance assessment of friction stir welded joints affected by heat input

Experiment and Modeling on Fatigue of the Dp780gi Spot Welded Joint