Abstract:Conventional S-N curve methods for fatigue life assessment fail to consider the different cracking mechanisms of crack initiation and propagation, resulting in less accurate predictions of fatigue life. The present study aims to assess the fatigue crack initiation and subsequent propagation life of rib-to-deck welded joints separately by accurate prediction of local cyclic elastoplasticity. The welding residual stress was simulated with high precision by thermal-mechanical analysis based on the real bead geometry and welding parameters, and defined as initial stress condition. The performance of an unconventional Fatigue Subloading Surface constitutive model (FSS model, hereafter) to predict the cyclic elastoplasticity in the sub-yield stress state was proved by comparing to the experiment results and conventional plasticity theory. The FSS model was then embedded to distinct zones of welded joints for cyclic structural analyses. Considering the relaxation of residual stress, the fatigue crack initiation by the local strain approach based on the local cumulative plasticity damage, and propagation life was assessed by the analytical approach based on the LEFM parameters of materials. As a connection between the crack initiation and propagation, the initial crack featured by 0.5 mm depth and semi-circular shape was proposed. The current work is verified to assess the fatigue life of rib-to-deck welded joints with high accuracy under the pure bending load against experiment results.

3D BE Analysis on Stress Intensity Factor of a Fatigue Crack in a Welded T-joint

A simulation of fatigue crack propagation in a welded T-joint using 3D boundary element method

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

A three-dimensional formula for determining stress intensity factors in finite element analysis of cracked bodies

Stress Intensity Factors for Cracked Cold-drawnSteel Wires under Tensile Loading

Study on Stress Intensity Factor of Girth Weld with Crack Defects

Three-dimensional weight function analyses and stress intensity factors for two eccentric and asymmetric surface cracks and surface-corner cracks at a circular hole

Investigation on Fatigue Behaviour of Load-Carrying Fillet Welded Joints Based on Mix-Mode Crack Propagation Analysis

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Weight function analyses and stress intensity factors for corner/surface crack in straight and tapered lugs

Fatigue Assessment on Butt Welded Splices in Plates of Different Thicknesses

Numerical Study on Fatigue Behavior of Tubular Joints for Signal Support Structures

Direct Computation of 3-D Stress Intensity Factors of Straight and Curved Planar Cracks with the P-Version Finite Element Method and Contour Integral Method

Computations of Stress Intensity Factors for Semi-Elliptical Cracks with High Aspect Ratios by Using the Tetrahedral Finite Element (fully Automated Parametric Study)

Cyclic elastoplasticity-based life assessment of fatigue crack initiation and subsequent propagation in rib-to-deck welded joints

Fatigue strength estimation of butt-welded joints between cast-steel and hot-rolled-steel plates

Analysis of Crack Propagation of Annular Butt Weld and Distribution of Weld-Induced Residual Stress

Three-dimensional weight function analyses and stress intensity factors for two unsymmetric surface cracks and surface-corner cracks at a circular hole

Numerical simulation of distortion-induced fatigue crack growth using extended finite element method

DBEM computation of T-stress and mixed-mode SIFs using interaction integral technique

A modified three-dimensional virtual crack closure technique for calculating stress intensity factors with arbitrarily shaped finite element mesh arrangements across the crack front