Abstract:In the failure analysis and safety assessment of dissimilar metal welded joints, the mechanical heterogeneity of local regions is usually ignored and limited sampling locations are selected. The mechanical behavior of the crack tip region is the main variables affecting the environmentally assisted cracking behavior, and it is crucial for understanding the impact of mechanical heterogeneity on the local stress-strain state at the crack tip in welded joints. In this study, the effect of mechanical heterogeneity on the local mechanical behavior at the crack tip and on the stress-strain condition at the crack tip front for different crack sizes was investigated through finite-element simulations based on user-defined material subroutines. The local mechanical behavior of an interface region and crack propagation direction with mechanical heterogeneity and a series of initial crack locations were analyzed. The results show that mechanical heterogeneity has a significant effect on the mechanical condition and growth path of cracks at different sampling locations. The interaction between the mechanical heterogeneity around the crack and the crack depth determines the stress and plastic strain in front of the crack tip, which causes a substantial change in the crack growth path. The interface cracks have high stress and plastic strain; thus, the interface is often the weak position where damage occurs. To guarantee a reliable integrity assessment of cracks in mechanically heterogeneous interface regions, local mechanical properties related to crack locations should be determined and utilized.

Study on Stress Intensity Factor of Girth Weld with Crack Defects

Interaction between rectangular cracks embedded in infinite medium

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Stress Intensity Factors for Cracked Cold-drawnSteel Wires under Tensile Loading

3D BE Analysis on Stress Intensity Factor of a Fatigue Crack in a Welded T-joint

Calculation of Stress Intensity Factor for Annular Double Cracks on Inner Surface of Pipeline

Analysis of Crack Propagation of Annular Butt Weld and Distribution of Weld-Induced Residual Stress

Stress Intensity Factor Solutions for Surface Cracks with Large Aspect Ratios in Cylinders and Plates

An interaction integral method coupled with special crack tip elements for evaluation of stress intensity factors

Development of Stress Intensity Factors for Deep Surface Cracks in Pipes and Plates

Weight Function of Stress Intensity Factor for Single Radial Crack Emanating from Hollow Cylinder

Calculation and Discussion for Crack Driving Force of Dissimilar Metal Welded Joint of Nuclear Power Equipment Nozzle and Safe End

Effect of Inhomogeneous Mechanical Properties on the Stress-Strain Field at the Crack Tip and Crack Growth Direction in Dissimilar Metal Welded Joints

Study of Dynamic Fracture Behavior of Pressure Pipes

General point load weight function of stress intensity factors for external circumferential surface cracks in pipes

Effect of Yield Strength Distribution Welded Joint on Crack Propagation Path and Crack Mechanical Tip Field

Computations of Stress Intensity Factors for Semi-Elliptical Cracks with High Aspect Ratios by Using the Tetrahedral Finite Element (fully Automated Parametric Study)

Empirical Solution of Stress Intensity Factors for the Inclined Inner Surface Crack of Pipe under External Pressure and Axial Compression

Numerical Simulation of Stress Intensity Factor under Multiaxial Loading

Development of Stress Intensity Factor Solution for Surface Crack at Nozzle Corner in Reactor Pressure Vessel

Closed-Form Stress Intensity Factor Solutions for Surface Cracks with Large Aspect Ratios in Plates