Abstract:Ni20Al30Fe intermetallic alloy was synthesized by laser powder deposition. Heat treatment experiments on the synthesized layer were conducted at different heat temperature and time to investigate the microstructure evolution. The results indicate that laser deposited Ni20Al30Fe intermetallic alloy consists of β phase and a few γ phase particles. The sizes of the crystal grains are within 30-50µm. After heat treatment at 650°C and 850°C, more γ phase precipitates in particle-shape and strip-shape within the crystal grains or along the crystal boundaries. With the increase of heat temperature and isothermal holding time, the sizes and amount of the γ phase increase. At the same time, the sub-crystal grains combine and grow, the sub-crystal boundaries disappear. The precipitation of the γ phase is favorable to the improvement of ductility of the Ni20Al30Fe intermetallic alloy. After heat treatment at 1050°C, recrystallization of the crystal grains occurs, which results in the refinement of the microstructure.Ni20Al30Fe intermetallic alloy was synthesized by laser powder deposition. Heat treatment experiments on the synthesized layer were conducted at different heat temperature and time to investigate the microstructure evolution. The results indicate that laser deposited Ni20Al30Fe intermetallic alloy consists of β phase and a few γ phase particles. The sizes of the crystal grains are within 30-50µm. After heat treatment at 650°C and 850°C, more γ phase precipitates in particle-shape and strip-shape within the crystal grains or along the crystal boundaries. With the increase of heat temperature and isothermal holding time, the sizes and amount of the γ phase increase. At the same time, the sub-crystal grains combine and grow, the sub-crystal boundaries disappear. The precipitation of the γ phase is favorable to the improvement of ductility of the Ni20Al30Fe intermetallic alloy. After heat treatment at 1050°C, recrystallization of the crystal grains occurs, which results in the refinement of the microstructure.

Amorphization of Ni_（61）Nb_（39） Alloy by Laser Surface Treatment

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Microstructure Evolution in a Fe36Ni36B19.2Si4.8Nb4 Bulk Amorphous Alloy Irradiated by a CO2 Laser Beam

Unidirectional Crystal Orientation of Dual-Phase Ni3Al-Based Alloy via Laser Irradiation

Nanocrystallization of Amorphous Fe73.5 Cu1Nb3Si13.5B9 Irradiated by Laser

Amorphization of Fe-Ni Based Alloys by Laser Cladding and Remelting

Experimental Study of the Microstructure and Micromechanical Properties of Laser Cladded Ni-based Amorphous Composite Coatings

Layered Microstructure Distribution and Forming Mechanism of Laser-Processed Ni-Fe-B-Si-Nb-C Amorphous Composite Coatings

Effect of the Remelting Scanning Speed on the Amorphous Forming Ability of Ni-based Alloy Using Laser Cladding Plus a Laser Remelting Process

Microstructures and mechanical properties of Nb nanoparticles modified Ni60 hard-facing alloy fabricated by laser metal deposition

Laser Annealing of Amorphous Ni-Ti Shape Memory Alloy Thin Films

Amorphous Structure in Laser Clad Ni-Cr-Al Coating on Al-Si Alloy

Grain Structure and Intermetallic Evolution of Nb-containing FeCrAl Alloy Treated by Cryogenic Laser Quenching

Dilution Effect on the Formation of Amorphous Phase in the Laser Cladded Ni–Fe–B–Si–Nb Coatings after Laser Remelting Process

An Ultra-Strong and Ductile Crystalline-Amorphous Nanostructured Surface Layer on TiZrHfTaNb0.2 High-Entropy Alloy by Laser Surface Processing

Physical properties and microstructures of a BN-NiCoCrAlY laser amorphous-nanocrystal reinforced composite coating

Modeling nonisothermal laser amorphization: a multicomponent alloy perspective

Thermal Stability of Surface Nanostructure Produced by Laser Shock Peening in a Ni-based Superalloy

Fabrication of Ni34.1Fe27.9B18 Si18Nb2 amorphous matrix coating on mild steel by laser processing

Microstructure and Wear Properties of Laser Processed Ni Based Amorphous Matrix Coatings

Influence of Heat Treatment on Microstructure of Laser Powder Deposited Ni20Al30Fe Intermetallic Alloy