Abstract:The effects of substrate treatment, growth temperature, and composition on the surface morphology of Ni-Cr thin films grown on MgO(001) are studied by scanning tunneling microscopy and atomic force microscopy. We demonstrate that a combination of acid-etched substrates and high temperature deposition (400 °C) will result in smooth films with well-defined terraces (up to 30 nm wide) that are suitable for the study of progression of chemical reactions on the surface. Two different treatments are used to prepare the MgO substrates for deposition and they introduce characteristic differences in film surface morphology. Thin films that are grown on the phosphoric acid-treated substrates present reduced nucleation density during the initial stages of film growth which results in long and wide terraces. Due to the ≈16% lattice mismatch in the Ni(001)/MgO(001) system, film growth at 400 °C yields discontinuous films and a two-step growth process is necessary to obtain a continuous layer. Ni films are deposited at 100 °C and subjected to a post-growth annealing at 300 °C for 2 h to obtain a smoother surface. The addition of just 5 wt. % Cr drastically changes the film growth processes and yields continuous films at 400 °C without de-wetting in contrast to pure Ni films. With increasing Cr content, the films become progressively smoother with wider terraces. Ni5Cr alloy thin films have an rms surface roughness of 3.63 ± 0.75 nm, while Ni33Cr thin film is smoother with an rms roughness of only 0.29 ± 0.13 nm. The changes in film growth initiated by alloying with Cr are due to changes in the interfacial chemistry which favorably alters the initial adsorption of the metal atoms on MgO surface and suggests a reduction of the Ehrlich-Schwoebel barrier. The growth of smooth Ni-Cr thin films with a well-defined surface structure opens up a new pathway for a wide range of surface science studies related to alloy performance.

SURFACE MORPHOLOGY AND CRYSTALLIZATION BEHAVIOR-OF AMORPHOUS NiNi88P12 ALLOY FILM

Nickel Induced Crystallization of Amorphous Silicon Thin Films

Study On The Crystallization Process Of Ni-P Amorphous Alloy

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Crystallization Behavior of the Ultrafine Amorphous Nickel-Phosphorus Alloy Particles

Crystallization behavior of amorphous phase in the Ti-Ni-Ta surface alloy synthesized on TiNi substrate by electron-beam method

In-situ XAFS Study on the Crystallization Mechanism of NiB Nano-Amorphous Alloy

Non-isothermal crystallization kinetics of amorphous electroless nickel-phosphorus alloy plating

ANNEALED CRYSTALLIZATION OF ULTRAFINE Ni-P AND Ni-Ce-P AMORPHOUS ALLOYS STUDIED BY XAFS

Structural Study of Ni-B Ultrafine Amorphous Alloy During Annealed Crystallization

Growth of Ni and Ni-Cr alloy thin films on MgO(001): Effect of alloy composition on surface morphology

Thermal evolution of nanocrystalline co-sputtered Ni-Zr alloy films: Structural, magnetic and MD simulation studies

Oxide dependent textured crystallization on amorphous alloy surface

Annealed Crystallization of Ultrafine Amorphous NiB Alloy Studied by XAFS.

Crystallization behavior and corrosion resistance of Al86Ni10Zr4 amorphous alloy under different annealing treatment conditions

The Behavior of Crystalline Grain Growth in TiNi Shape Memory Alloy Thin Films

Amorphization of Ni_（61）Nb_（39） Alloy by Laser Surface Treatment

In-Situ XAFS Investigation of the Crystallization Mechanism of Ni-B Nano-Amorphous Alloy

Insights into the structure sustainable evolution and crystallization kinetics of amorphous Mg60Ni30La10 alloy

Synthesis and characterization of amorphous NiCoP alloy films by magnetic assisted jet electrodeposition

Microstructure, Surface Morphology, and Mechanical Properties of Nanocrystalline Tin/Amorphous Si3n4 Composite Films Synthesized by Ion Beam Assisted Deposition