Abstract:A new methodology is demonstrated for analyzing spatial temperature distributions using modeling and machine learning. The method is applied to X‐ray data gathered during in situ laser melting.Laser melting, such as that encountered during additive manufacturing, produces extreme gradients of temperature in both space and time, which in turn influence microstructural development in the material. Qualification and model validation of the process itself and the resulting material necessitate the ability to characterize these temperature fields. However, well established means to directly probe the material temperature below the surface of an alloy while it is being processed are limited. To address this gap in characterization capabilities, a novel means is presented to extract subsurface temperature‐distribution metrics, with uncertainty, from in situ synchrotron X‐ray diffraction measurements to provide quantitative temperature evolution data during laser melting. Temperature‐distribution metrics are determined using Gaussian process regression supervised machine‐learning surrogate models trained with a combination of mechanistic modeling (heat transfer and fluid flow) and X‐ray diffraction simulation. The trained surrogate model uncertainties are found to range from 5 to 15% depending on the metric and current temperature. The surrogate models are then applied to experimental data to extract temperature metrics from an Inconel 625 nickel superalloy wall specimen during laser melting. The maximum temperatures of the solid phase in the diffraction volume through melting and cooling are found to reach the solidus temperature as expected, with the mean and minimum temperatures found to be several hundred degrees less. The extracted temperature metrics near melting are determined to be more accurate because of the lower relative levels of mechanical elastic strains. However, uncertainties for temperature metrics during cooling are increased due to the effects of thermomechanical stress.

Modeling nonisothermal laser amorphization: a multicomponent alloy perspective

Partial crystallization in a Zr-based bulk metallic glass in selective laser melting

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Modelling of Microstructure Evolution during Laser Processing of Intermetallic Containing Ni-Al Alloys

Resolving thermal gradients and solidification velocities during laser melting of a refractory alloy

Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study

Thermal Modeling of Laser-Annealing-Induced Crystallization of Amorphous Niti Thin Films

Combining Synchrotron X-ray Diffraction, Mechanistic Modeling, and Machine Learning for In Situ Subsurface Temperature Quantification during Laser Melting

Combining synchrotron X‐ray diffraction, mechanistic modeling and machine learning for in situ subsurface temperature quantification during laser melting

Thermodynamic and atomistic modeling of irradiation-induced amorphization in nanosized metal–metal multilayers

Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy

Amorphization of Ni_（61）Nb_（39） Alloy by Laser Surface Treatment

Intermetallic compound formation during laser alloying of aluminum alloys with metals

Phase Composition, Microstructure and Mechanical Properties of Zr57Cu15Ni10Nb5 Alloy Obtained by Selective Laser Melting

Two-dimensional heat transfer and melt flow in the laser-impact zone at selective laser melting of thin walls -- II: Modeling

Multi-scale numerical simulation of the thermodynamic characteristics of Nb particles reinforced Zr-based amorphous composites by SLM

Atomic-level understanding of crystallization in the selective laser melting of Fe50Ni50 amorphous alloy

Understanding of crystallization behaviors in laser 3D printing of bulk metallic glasses

Revealing the effects of laser beam shaping on melt pool behaviour in conduction-mode laser melting

Laser Metal Deposition of Rene 80—Microstructure and Solidification Behavior Modelling

Morphology and properties of non-ferrous alloys in the zones of laser thermal deformation processing