Abstract:High efficiency thin-film silicon (Si) solar cells were prepared on flexible substrates by the plasma-enhanced chemical vapor deposition method. To improve their performance, the microstructural, electrical, and optical properties of the core component layers including the metal rear reflectors, p- and n-type doped layers, and intrinsic absorber layers were controlled sophistically. To enable the use of flexible substrates with low heat resistance as well as to enhance light-scattering properties, nanotextured rear reflectors with a Ag/Al:Si bilayer structure were developed by dc magnetron sputtering at a low substrate temperature of below 150 degrees C. Highly crystalline n-doped seed layers (which effectively eliminate a defect-dense amorphous region formed in the initial growth stage of intrinsic nanocrystalline silicon (nc-Si:H) absorber layers) and p-type wide-bandgap nanocrystalline silicon carbide (nc-SiC:H) window layers (which reduce the parasitic absorption loss in the short wavelength region and increase the open circuit voltage (Voc)) were successfully applied to enhance the performance characteristics of the solar cells. Through the combination of the developed core component layers, high conversion efficiencies of 8.84% (V-oc = 0.53 V, J(sc) = 25.28 mA/cm(2), and fill factor (FF) = 0.66, where J(sc) is the short circuit current) and 7.48% (V-oc = 0.50 V, J(sc) = 21.07 mA/cm(2), and FF = 0.71) were obtained for nc-Si:H solar cells fabricated on stainless steel (SUS) and polyimide substrates, respectively, at a low substrate temperature of below 150 degrees C. Flexible a-Si:H/nc-Si:H double-junction solar cells fabricated on SUS substrates showed a high conversion efficiency of 11.46% (V-oc = 1.38 V, J(sc) = 11.53 mA/cm(2), and FF = 032) when the nc-Si:H solar cells developed in this study were applied as a bottom cell.

High Performance Organic/20μm Crystalline-Silicon Heterojunction Solar Cells

Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression

Tuning of the Contact Properties for High-Efficiency Si/PEDOT:PSS Heterojunction Solar Cells

High-Performance Ultrathin Organic-Inorganic Hybrid Silicon Solar Cells via Solution-Processed Interface Modification.

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Highly Efficient and Highly Flexible Thin Crystalline Silicon Heterojunction Solar Cells Based on Dopant-Free Carrier-Selective Contacts Fabricated with Simple Processes

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

Over 16% Efficiency Organic/nanostructured Si Heterojunction Solar Cells with a P-Doped Organic Small Molecule Layer

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

High Efficiency Organic/silicon Hybrid Solar Cells with Doping-Free Selective Emitter Structure Induced by a WO3 Thin Interlayer

High Efficiency Organic/Silicon-Nanowire Hybrid Solar Cells: Significance of Strong Inversion Layer

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

High Efficiency Organic-Si Hybrid Solar Cells with a One-Dimensional CdS Interlayer.

A 12%-efficient upgraded metallurgical grade silicon-organic heterojunction solar cell achieved by a self-purifying process.

Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction

< 50-μm thin crystalline silicon heterojunction solar cells with dopant-free carrier-selective contacts

50-Μm Thick Flexible Dopant-Free Interdigitated-Back-contact Silicon Heterojunction Solar Cells with Front MoOx Coatings for Efficient Antireflection and Passivation.

Performance Enhancement of Thin-Film Silicon Solar Cells by Development of Core Component Layers

Silicon Nanowires Incorporated Efficient and Flexible PEDOT:PSS/Silicon Hybrid Solar Cells

Fully Textured, Production‐line Compatible Monolithic Perovskite/Silicon Tandem Solar Cells Approaching 29% Efficiency

Silicon/Organic Hybrid Solar Cells with 16.2% Efficiency and Improved Stability by Formation of Conformal Heterojunction Coating and Moisture‐Resistant Capping Layer