Abstract:When excessive quantum noise is present in extremely low dose X-ray CT imaging, statistical properties of the data has to be considered to achieve a satisfactory image reconstruction. Statistical iterative reconstruction with accurate modeling of the noise, rather than a filtered back-projection (FBP) with low-pass filtering, is one way to deal with the problem. Estimating a noise-free sinogram to satisfy the FBP reconstruction for the Radon transform is another way. The benefits of the latter include a higher computation efficiency, more uniform spatial resolution in the reconstructed image, and less modification of the current machine configurations. In a clinic X-ray CT system, the acquired raw data must be calibrated, in addition to the logarithmic transform, to achieve the high diagnostic image quality. The calibrated projection data or sinogram no longer follow a compound Poisson distribution in general, but are close to a Gaussian distribution with signal-dependent variance. In this paper, we first investigated a relatively accurate statistical model for the sinogram data, based on several phantom experiments. Then we developed a penalized likelihood method to smooth the sinogram, which led to a set of nonlinear equations that can be solved by iterated conditional mode (ICM) algorithm within a reasonable computing time. The method was applied to several experimental datasets acquired at 120 kVp, 10 mA/20 mA/50 mA protocols with a GE HiSpeed multi-slice detector CT scanner and demonstrated a significant noise suppression without noticeable sacrifice of the spatial resolution.

Analysis and Optimization on Nonlinearity of CTIA Readout Circuit

Analysis and Design of a High Performance Infrared Detector Readout Circuit

Analysis of the Nonlinearity of Cooled Infrared Detector

A Low-Noise CTIA-based Pixel with CDS for SWIR Focal Plane Arrays

Nonlinear Sinogram Smoothing for Low-Dose X-ray CT

Theoretical Investigation on Input Properties of DI and CTIA Readout Integrated Circuit

A High Linearity Readout Integrated Circuit for Uncooled IR Detector

A TDI CMOS readout circuit for IRFPA with linearity improvement

Novel High Uniformity Readout Circuit Allowing Microbolometers to Operate with Low Noise.

Effects of Capacitance Ratio on the Image Linearity of Capacitive Division Image Readout

Imaging of the Mid-Infrared Focal Plane Array with a Modified Read-Out Circuit.

New Linearization Implementations Improving IIP3 of Wideband LNTA by More Than 14Db

Cryogenic Capacitive Transimpedance Amplifier for Astronomical Infrared Detectors

A Low Noise TIA with Continuous Time-Gain Compensation for Ultrasound Transducers

Self-Calibration Readout Circuits for CMOS Microbolometers

A Common Source Lnta Of High Linearity Robust To Temperature And Process

A low noise capacitance to voltage readout circuit based on active feedback charge sensitive amplifier for micro-gyro

Design and Optimization of Direct-Conversion Photon-Counting Detector for Dual-Energy Ct Imaging

A Low-Power, High-Resolution Analog Front-End Circuit for Carbon-Based SWIR Photodetector

Research and Optimization of High-Performance Front-End Circuit Noise for Inertial Sensors

Design of Capacitive-Read Infrared FPA