Abstract:The current densities flowing in high-temperature superconducting wires are mostly non-uniform during operations (caused by the screening current effect). This is a major challenge to high-field superconducting magnets based on (RE)Ba 2 Cu 3 O 7-x (REBCO; RE, rare earth) tapes, as to cause (a) uncertainty of the field distribution and (b) concentrated uneven Lorentz force that damages the magnet. For no-insulation (NI) REBCO coils, the current distribution would be even complicated when external time-varying fields induce extra transport current circulating in NI coils. For this study, a numerical model is established, and the results are compared with hall sensor measurements for an NI coil sample. Different with conventional insulated coils, for NI coils, it was measured that the variation of axial fields (parallel to REBCO surface) could introduce remnant current densities persisting on REBCO tapes, which generate remnant fields. These remnant fields would cause the distortion of the spatial field distribution of a magnet, and were also measured to exhibit constant field decay with logarithmic time. These remnant fields pose extra concerns for NI coils for applications in NMR/MRI magnets in terms of threatening the spatial field homogeneity and temporal field stability of these magnets. Practical cases are simulated, i.e., NI coils are under time-varying fields generated by its adjacent NI coils or background magnets during quench/fault. The induced current (and the resulted Lorentz forces) concentrates on one-side edge of REBCO tapes that is adjacent to the quenched/fault coils; this observation helps understand and protect the mechanical damage observed in recent operations of NI REBCO magnets.

The Operation Test of YBCO Binary Current Leads Developed for an NI REBCO Magnet

Development of YBCO Insert for a 25 T All Superconducting Magnet

Critical Current Measurement of REBCO Cables by Using a Superconducting Transformer

Development of 4ka Current Leads Using Stacked REBCO Tapes for BESIII Detector Magnet

Experiment and Numerical Modeling of Current Distributions Inside REBCO Tapes of No-Insulation Superconducting Magnet Coils Under Time-Varying Fields

The experimental research and analysis on the quench propagation of YBCO coated conductor and coil

Experimental research on thermal stability of conduction-cooled YBCO magnet for induction heating

Experimental study on the an-isotropic critical current of REBCO tape

Magnetic Field and Temperature Scaling of the Critical Current of REBCO Tapes

33.8 TESLA WITH A YBa2Cu3O7−xSUPERCONDUCTING TEST COIL

The Research on No-Insulation ReBCO Racetrack Coil

Design and Testing of a Gas-Helium Conduction Cooled REBCO Magnet for a 300 kvar HTS Synchronous Condenser Prototype

A Novel REBCO Conductor Design to Reduce Screening-Current Field in REBCO Magnets

Test of an 8.66-T REBCO Insert Coil with Overbanding Radial Build for a 1.3-Ghz LTS/HTS NMR Magnet

Critical Current Correlations and Regressions Across the Superconducting Parameter Space of REBCO Wires, B||c

Magnetization and screening current in an 800-MHz (18.8-T) REBCO NMR insert magnet: experimental results and numerical analysis

Comparative study on the critical current performance of Bi-2223/Ag and YBCO wires in low magnetic fields at liquid nitrogen temperature

Experimental and Numerical Study on the Magnetization Process of Roebel Cable Segments

Experimental study on screening-current induced strain in REBCO insert coils: under critical current control and operation current cycles

THE CURRENT LEADS AND THEIR ELECTRICAL INSULATION & THERMAL CONDUCTION FOR 35kJ SMES

Acceptance Tests of REBCO Wires for Field Coil of 10 kW High-Temperature Superconducting Generator Cooled by Liquid Hydrogen