Abstract:Laser solid forming (LSF) is a newly advanced additive manufacturing technique which offers a huge potential in efficiency and cost savings for fabricating the components of aerospace titanium alloys with high performance. In this research, the macrostructure/microstructure and electrochemical dissolution features of the Ti-6Al-4V alloy produced by LSF and forging were investigated. The LSFed Ti-6Al-4V that included as-deposited and annealing heat treatment (HT) conditions contains three periodically distributed microstructural morphologies: fine microstructure zone (FMZ), coarse microstructure zone (CMZ), and layer band. All zones of the different microstructural morphology in an entire deposit are constituents of α-laths and a small amount remained in the β phase. An alternating structure of coarse and fine microstructures was observed along the deposition direction in the deposit. Layer bands are generally spaced above the CMZ. The CMZ is a constituent of a slightly coarser basket weave structure than that of the FMZ. However, the layer bands present the microstructure of colony α. Additionally, the α-laths are slightly coarsened by HT, and this simultaneously results in a more homogeneous microstructure compared with the as-deposited microstructure. Moreover, the forged Ti-6Al-4V possesses the most homogeneous microstructure and the largest size of the α phase. Simultaneously, a variety of dissolved morphology features were observed in the three types of samples after potentiodynamic polarization tests. The order of the surface macrosmooth level of these samples is forged > HT > as-deposited. For LSFed Ti-6Al-4V, the FMZs and the layer bands present a faster electrochemical dissolution rate than that of the CMZs. Consequently, the uneven surface is revealed by the distinct dissolution rate of different microstructural zones at the same LSFed sample. The forged Ti-6Al-4V alloys present a uniformly dissolved behavior, which is attributed to the homogeneity of the microstructure. The elimination of the layer bands and the homogenization of the microstructure of the LSFed Ti-6Al-4V are of great significance for improving the surface quality during electrochemical machining.

Microstructure and Properties of Ti60 Alloy by Laser Solid Forming and Ultrasonic Impact Hybrid Manufacturing

Strengthening Effect in Laser Metal Deposited Ti6Al4V Alloy Via Layer-by-layer Ultrasonic Impact Treatment

Residual Stress, Defects and Grain Morphology of Ti-6Al-4V Alloy Produced by Ultrasonic Impact Treatment Assisted Selective Laser Melting

Relationship among Microstructure, Defects and Performance of Ti60 Titanium Alloy Fabricated by Laser Solid Forming

Microstructural Evolution and Mechanical Properties of LDED Ti-6Al-4 V Alloy Polished with a Hybrid Laser Polishing Technique

Microstructure and Mechanical Properties of Ti-6al-4v Components Fabricated by Laser Micro Cladding Deposition

Microstructure and deformation behavior of Ti-6Al-4V alloy by high-power laser solid forming

Elimination of defects in laser metal deposited TiCp/Ti6Al4V composite by synchronous ultrasonic impact treatment

Effect of Layer Band and Heterogeneity of Microstructure on Electrochemical Dissolution of Laser Solid Formed Ti-6Al-4V Alloy

Achieving Superior Burn Resistant and Mechanical Properties of Ti40 Alloy by Laser Solid Forming

Microstructure Modulation and Property Enhancement Via an Underwater Induction Heating Treatment Strategy for Underwater Laser-Directed Energy Deposition of Ti-6Al-4V

Effect of Heat Treatment on Microstructure and Mechanical Properties of Titanium Alloy Fabricated by Laser–Arc Hybrid Additive Manufacturing

Hybrid Fabrication of Cold Metal Transfer Additive Manufacturing and Laser Metal Deposition for Ti6Al4V: The Microstructure and Dynamic/Static Mechanical Properties

High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components

Effect of heat treatment on microstructure and mechanical properties of laser-deposited Ti65 near-alpha titanium alloy

Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Deposited Ti60A Alloy

Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening

Effect of Post Heat Treatment on Microstructure and Mechanical Properties of Ti-6Al-4V Jointing Parts Proceeded by Laser Additive Manufacturing

Influence of laser treatment on the microstructural evolution and performance of Ti65 alloy

Tailoring microstructure of additively manufactured Ti6Al4V titanium alloy using hybrid additive manufacturing technology

Grain refinement and improved tensile properties of Ti5Al2Sn2Zr4Mo4Cr titanium alloy fabricated by laser solid forming