Effect of Heat Treatment on Microstructure and Mechanical Properties of Titanium Alloy Fabricated by Laser–Arc Hybrid Additive Manufacturing

Yuhang Chen,Juan Fu,Lilong Zhou,Yong Zhao,Feiyun Wang,Guoqiang Chen,Yonghui Qin

DOI: https://doi.org/10.3390/coatings14050614

IF: 3.236

2024-05-14

Coatings

Abstract:The tailored thermal heat-treatment process for Ti-6Al-4V alloy manufactured by laser–arc hybrid additive manufacturing can achieve desired microstructures and excellent mechanical properties for components. The effects of different heat treatment regimens on the microstructure and mechanical properties of Ti-6Al-4V alloy manufactured by laser–arc hybrid additive manufacturing are investigated in this study. Utilizing optical microscopy and scanning electron microscopy, we analyze the variations in microstructure with changes in heat-treatment parameters and explore the reasons for the changes in mechanical properties under different solutions' treatment temperatures and cooling rates. The microstructure of Ti-6Al-4V alloy fabricated via laser–arc hybrid additive manufacturing was primarily composed of Widmanstätten α plate structures and a small amount of acicular martensite α′ within columnar β grains that grew outward from the substrate along the deposition direction. Following solution treatment and aging heat treatment, the microstructure transitioned to a typical high-performance net basket structure with significantly reduced α plate thickness, leading to noticeable enhancements in sample ductility and toughness. Specifically, when the solution treatment and aging treatment regimen was set at 950 °C for 1 h, followed by air cooling, and then aging at 540 °C for 6 h with subsequent air cooling, the average grain size decreased by a factor of two compared to the as-deposited samples, while the impact toughness increased by 66.7%.

materials science, multidisciplinary,physics, applied, coatings & films

What problem does this paper attempt to address?

This paper aims to study the effects of heat treatment on the microstructure and mechanical properties of Ti-6Al-4V titanium alloy during the Laser–Arc Hybrid Additive Manufacturing (LAHAM) process. Specifically, the paper explores how different heat treatment schemes (such as solution temperature and cooling methods) affect the microstructure and mechanical properties of Ti-6Al-4V alloy manufactured by LAHAM.

- **Research Background**: Ti-6Al-4V titanium alloy is widely used in fields such as marine, aerospace, and biomedical research due to its excellent properties. However, traditional forming processes are difficult to meet the one-time rapid forming requirements of large structural parts. In contrast, Laser–Arc Hybrid Additive Manufacturing technology has significant advantages in improving forming accuracy and production efficiency.
- **Research Objective**: To study the specific effects of different heat treatment parameters (such as solution temperature and cooling rate) on the microstructure and mechanical properties of Ti-6Al-4V alloy manufactured by LAHAM, in order to optimize material performance.

The paper mainly analyzes the microstructure changes of Ti-6Al-4V alloy under different heat treatment conditions through optical microscopy and scanning electron microscopy, and discusses the impact of these changes on mechanical properties. The study found that specific heat treatment schemes (such as solution treatment at 950°C for 1 hour, followed by air cooling, and then aging treatment at 540°C for 6 hours) can significantly improve the microstructure of the samples, thereby enhancing their plasticity and toughness. For example, under this heat treatment scheme, the average grain size was reduced by half, and the impact toughness increased by 66.7%.