Abstract:Laser solid forming (LSF) is a newly advanced additive manufacturing technique which offers a huge potential in efficiency and cost savings for fabricating the components of aerospace titanium alloys with high performance. In this research, the macrostructure/microstructure and electrochemical dissolution features of the Ti-6Al-4V alloy produced by LSF and forging were investigated. The LSFed Ti-6Al-4V that included as-deposited and annealing heat treatment (HT) conditions contains three periodically distributed microstructural morphologies: fine microstructure zone (FMZ), coarse microstructure zone (CMZ), and layer band. All zones of the different microstructural morphology in an entire deposit are constituents of α-laths and a small amount remained in the β phase. An alternating structure of coarse and fine microstructures was observed along the deposition direction in the deposit. Layer bands are generally spaced above the CMZ. The CMZ is a constituent of a slightly coarser basket weave structure than that of the FMZ. However, the layer bands present the microstructure of colony α. Additionally, the α-laths are slightly coarsened by HT, and this simultaneously results in a more homogeneous microstructure compared with the as-deposited microstructure. Moreover, the forged Ti-6Al-4V possesses the most homogeneous microstructure and the largest size of the α phase. Simultaneously, a variety of dissolved morphology features were observed in the three types of samples after potentiodynamic polarization tests. The order of the surface macrosmooth level of these samples is forged > HT > as-deposited. For LSFed Ti-6Al-4V, the FMZs and the layer bands present a faster electrochemical dissolution rate than that of the CMZs. Consequently, the uneven surface is revealed by the distinct dissolution rate of different microstructural zones at the same LSFed sample. The forged Ti-6Al-4V alloys present a uniformly dissolved behavior, which is attributed to the homogeneity of the microstructure. The elimination of the layer bands and the homogenization of the microstructure of the LSFed Ti-6Al-4V are of great significance for improving the surface quality during electrochemical machining.

Effect of Layer Band and Heterogeneity of Microstructure on Electrochemical Dissolution of Laser Solid Formed Ti-6Al-4V Alloy

Distinction in anodic dissolution behavior on different planes of laser solid formed Ti-6Al-4V alloy

Electrochemical dissolution behavior of Ti6Al4V alloy: Effect of microstructure and processing method

Research on Microstructure and Properties of Ti-6Al-4V Alloys by High Power Laser Solid Forming

Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Microstructure and Mechanical Properties of Ti-6al-4v Components Fabricated by Laser Micro Cladding Deposition

Microstructure and deformation behavior of Ti-6Al-4V alloy by high-power laser solid forming

Relationship among Microstructure, Defects and Performance of Ti60 Titanium Alloy Fabricated by Laser Solid Forming

Electrochemical Behavior of Laser Powder Bed Fusion (L-PBF) Ti–6Al–4V Alloy: Influence of Phase and Grain Boundaries on Surface Passive Film Formation

Morphological effects on the electrochemical dissolution behavior of forged and additive manufactured Ti-6Al-4V alloys in runway deicing fluid

Microstructures and Mechanical Properties of Laser Rapid-Formed Ti-6Al-4V Alloy

Achieving Superior Burn Resistant and Mechanical Properties of Ti40 Alloy by Laser Solid Forming

Microstructural Evolution and Mechanical Properties of LDED Ti-6Al-4 V Alloy Polished with a Hybrid Laser Polishing Technique

Microstructure and Corrosion Resistance of Ti6Al4V Manufactured by Laser Powder Bed Fusion

Electrochemical dissolution and passivation of laser additive manufactured Ti6Al4V controlled by elements segregation and phases distribution

Achieving superior ductility for laser solid formed extra low interstitial Ti-6Al-4V titanium alloy through equiaxial alpha microstructure

Microstructure and Properties of Ti-6Al-4V Fabricated by Low-Power Pulsed Laser Directed Energy Deposition

Distinction in electrochemical behaviour of Ti6Al4V alloy produced by direct energy deposition and forging

Heat-treated Microstructure and Mechanical Properties of Laser Solid Forming Ti-6Al-4V Alloy

Titanium Alloy Components Fabrication by Laser Depositing TA15 Powders on TC17 Forged Plate: Microstructure and Mechanical Properties