Abstract:In this study, we designed the processing windows for laser powder bed fusion (LPBF) of Ti-6Al-4V (Ti-64) alloy by using central composite design and made a detailed investigation into the influence of processing parameters on the defects. The purpose is to investigate the effect of defects on mechanical properties. It was found that insufficient energy density could lead to the formation of lack of fusion (LOF) defects and produce non-melted powders on the surface, while excessive energy density could lead to cracks that were detrimental to mechanical performance. In addition, the microstructural evaluation found that relatively low energy density could lead to shorter columnar prior-β grains, while prior-β grains in the sample processed by the high energy density extended almost the entire height of the cross-section, which could lead to the strong mechanical property anisotropy. The prior β grains are formed by heterogeneous nucleation on the partially melted material powder. As the energy input increases, all the powder powders in the molten pool can be melted so that these particles do not act as nucleation sites and the prior β grain can grow through more layers without forming new grains being able to nucleate. The prior β-grain in as-built Ti-64 samples consisted of acicular α’ martensite with myriads of lattice distortions, as a precursor to a phase transition, which lead to strong tensile strength and poor ductility. Annealing heat treatment promoted the improvement of the ductile performance of LPBF Ti-64. Overall, this study provides comprehensive views on the effects of processing parameters (laser power, scanning speed, and hatch distance) on the internal (pores and LOF) and external (unmelted powder, sintering neck, and crack), defects, microstructure, and tensile property evaluation of LPBF Ti-64, which offer insights for the development of additive manufactured titanium alloys with excellent mechanical property.

Solidification microstructure variations in additively manufactured Ti-6Al-4V using laser powder bed fusion

Laser Powder Bed Fusion of Titanium Aluminides: An Investigation on Site-Specific Microstructure Evolution Mechanism

The effects of specimens geometry on solidification conditions and microstructure formation in laser powder bed fusion fabricated Ti–6Al–4V alloys

Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion

Unveiling the impact of layerwise laser preheating on microstructure and mechanical response in laser powder bed fusion

Microstructure Tailoring for High Strength Ti-6Al-4V without Alloying Elements through Optimized Preheating and Post-Heating Laser Scanning in Laser Powder Bed Fusion

Influence of Powder Bed Temperature on the Microstructure and Mechanical Properties of Ti-6Al-4V Alloy Fabricated via Laser Powder Bed Fusion

High power laser powder bed fusion of Ti6Al4V alloy: The control of defects, microstructure, and mechanical properties

Innovative Fabrication Design for In Situ Martensite Decomposition and Enhanced Mechanical Properties in Laser Powder Bed Fused Ti6Al4V Alloy

In-situ investigation into the deformation behavior of Ti-6Al-4V processed by laser powder bed fusion

Effect of processing parameters on the defects, microstructure, and property evaluation of Ti-6Al-4V titanium alloy processed by laser powder bed fusion

Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy

Solidification Microstructure Prediction of Ti-6Al-4V Alloy Produced by Laser Melting Deposition

Towards a process-structure model for Ti-6Al-4V during additive manufacturing

In Situ Microstructure Modification Using a Layerwise Surface-Preheating Laser Scan of Ti-6Al-4V during Laser Powder Bed Fusion

Additively manufactured β-Ti5553 with laser powder bed fusion: microstructures and mechanical properties of bulk and lattice parts

Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting

Experimental and Crystal Plasticity Finite Element Investigations of Plastic Anisotropy in Additively Manufactured Ti6Al4V Alloy

Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy

Microstructure and Corrosion Resistance of Ti6Al4V Manufactured by Laser Powder Bed Fusion

Stability of molten pool and microstructure evolution of Ti-6Al-4V during laser powder bed fusion with a flat-top beam