Abstract:CORC cables are subject to large transverse compression electromagnetic forces in fusion projects. Unfortunately, the electromagnetic force exceeding its critical transverse compression load will cause an irreversible decrease in its critical current. Therefore, it is particularly important to enhance the critical transverse compression load to ensure that the critical current does not decrease during operation. The winding method of HTS (High tempreture superconducting) tape on the central former is variable. So the experimental study on how to increase the critical transverse compression load of CORC cable by changing the winding method of HTS tape is carried out in this paper. Firstly, the influence law of parameters of the number of HTS tapes per layer and the number of HTS tape layers on their transverse compression performance are analysed independently. The results indicate that increasing the number of HTS tapes per layer and the number of HTS tape layers can both improve the transverse compression performance of CORC cables. Whereas, in the case of a cable with a certain critical current demand (the same total number of HTS tapes), increasing the number of HTS tape layers necessarily reduces the number of HTS tapes per layer. Therefore, in order to compare the degree of influence of the above two parameters, we conducted transverse compression experiments on multiple groups of CORC cables with different winding methods (more layers with few tapes per layer or few layers with more tapes per layer) under the same critical current demand. The results show that under the same critical current demand, choosing the winding method that reduces the number of HTS tape layers and increases the number HTS tapes per layer can effectively improve the transverse compression performance of CORC cables. A 3D multilayer CORC cable transverse compression finite element (FE) model is also established to explain the inherent reasons for the differences in transverse compression performance of CORC cables under different HTS tape winding methods.

Study on AC Losses and Influencing Factors of Three-Phase Coaxial HTS Cable under Harmonic Current

Research on Structure Optimization of Cold Dielectric High-Temperature Superconducting Cables

A Review on Insulation and Dielectrics for High- Temperature Superconducting Cables for Power Distribution: Progress, Challenges, and Prospects

Analysis of AC Transport Loss in Conductor on Round Core Cables

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission

Investigation on Loss Reduction Strategies of Single-Core HVAC Submarine Cables

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Steady-state Electrical Properties and Loss Reduction Measures Analysis for 220 Kv Tunnel Cable System

An Investigation on Grounding System of AC Single-core Submarine Cable Based on Multi-conductor Analysis Theory

Investigation on Steady State Characteristics and Loss Reduction Measures of 220 Kv Power Cables

Electromagnetic Assessment and AC Losses of Triaxial Cables with Multiple 2G-HTS Layers Per Phase

Optimization of HTS Transformer Parameters and Analysis of AC Losses Under Harmonic Conditions

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

Effect of Multilayer Configuration on Ac Losses of Superconducting Power Transmission Cables Consisting of Narrow Coated Conductors

Influence of HTS tape arrangement on the transverse compression performance of copper former CORC cables

Flux-transfer losses in helically wound superconducting power cables

Electromagnetic characterization of high-temperature superconducting cables with partial tape faults

Numerical Analysis on the Current Distribution and the Loss in HTS Stacked Tapes Considering Termination Resistances

Understanding and minimizing ac losses in CORC cables of YBCO superconducting tapes

Temperature Analysis of HTS Cables in Superconducting DC Energy Pipeline During Short-circuit Fault