Abstract:For the first time, it was found that CuBr nanoparticles with a size close to 70 nm could be readily prepared onto the surface of the commercial copper (Cu) foil via a soaking method at room temperature in which the preparation solution only contained the commercial Cu foil, CuSO4 and 1-butyl-3-methylimidazole bromide, generating a novel current collector of CuBr/Cu. As observed by the SEM images, a large number of nanoparticles were anchored on the surface of the commercial Cu foil after the soaking process. The results of XRD and XPS substantially indicated that all the nanoparticles seen in the SEM images were CuBr particles rather than other substances. Unexpectedly, after 20 cycles, the discharge capacity (DC) value of the commercial graphite on CuBr/Cu at 100 mA g(-1) was still maintained as high as 428 mAh g(-1), 1.6 times higher than the case of using the traditional Cu foil (261 mAh g(-1)). Particularly, even at 500 mA g(-1), the DC value of the commercial graphite on CuBr/Cu (132 mAh g(-1)) was still about 2.9 time higher than that on the commercial copper foil (45 mAh g(-1)). Besides the newly developed CuBr nanoparticles preparation method, a novel strategy to promote the DC value of the commercial graphite was created in this work, which was very profitable for the electrochemical property improvement of the graphite electrode when applied as a conventional anode of lithium ion batteries (LIBs).

Rapid Preparation of Nanoporous Copper by Transient Joule Heating Vapor Phase Dealloying

Preparation of nanoporous copper foil by chemical dealloying from electro-deposited CuZn alloy

Preparation of the Porous Copper Foil Current Collector for High-Performance Lithium-Ion Batteries by Electro-Codeposition: Effect of Stirring Speed

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

Facile fabrication of a novel nanoporous Au/AgO composite for electrochemical double-layer capacitor

Microstructure and Properties of Porous Copper Foils with High Specific Surface Area Prepared by Electrodeposition

Nanograined Copper Foil As a High-Performance Collector for Lithium-Ion Batteries

A Study of Electroplated Nanoporous Copper Using Aberration-Corrected Transmission Electron Microscopy

Fabrication and Functionalization of Tunable Nanoporous Copper Structures by Hybrid Laser Deposition and Chemical Dealloying

A Preparation Method of Patterned Nanoporous Copper

Investigation on the Electrochemical Catalysis Properties of Ni-decorated Nanoporous Copper Formed by Hybrid Laser Deposition

Rapid preparation of micro/nano porous Cu/Cu 2 O particles through dealloying of powder sintered Cu-Al alloy

Porosity evolution and oxide formation in bulk nanoporous copper dealloyed from a copper-manganese alloy studied by in situ resistometry

High-efficiency and low-consumption preparation of ultra-thin and high-performance nanotwinned copper foils by high-gravity intensified direct current electrodeposition

Preparation and Capacitance of Copper-Doped Activated Carbon from Polyacrylonitrile (pan) Precursor

Growing Cuprite Nanoparticles on Copper Current Collector Toward Uniform Li Deposition for Anode-Free Lithium Batteries

Pure copper nanoparticles prepared by coating-assisted vapor phase synthesis without agglomeration

Preparation, micro-structure and characterization of high strength and low profile lithium copper foil with SPS and HP additives

Mechanistic Study of Ag/Pd-PVP Nanoparticles and Their Functions As Catalyst for Electroless Copper Deposition

Dealloying-induced modulation upon porous layer depth of three-dimensional copper current collector for improving lithium plating/stripping capability

Preparation of CuBr Nanoparticles on the Surface of the Commercial Copper Foil Via a Soaking Method at Room Temperature: Its Unexpected Facilitation to the Discharge Capacity of the Commercial Graphite Electrode