Abstract:The relationship between activities of involved deformation mechanisms and the evolution of microstructure and texture during uniaxial tension of AZ31 magnesium alloy with a rare non-basal texture has been thoroughly investigated in the present study by means of electron backscattered diffraction (EBSD) measurement and visco-plastic self-consistent (VPSC) modeling. These results show that except basal slip and prismatic slip, {101¯2} extension twin (ET) also plays a significant role during plastic deformation. With the increasing tilted angle between loading direction and rolling direction (RD) of sheet, the activity of {101¯2} ET possesses a decreasing tendency and its role in plastic deformation changes from the one mainly sustaining plastic strain to the one mainly accommodating local strain between individual grains. When {101¯2} ET serves as a carrier of plastic strain, it mainly results in the formation of basal texture component (c-axis//ND, normal direction). By comparison, when the role of {101¯2} ET is to accommodate local strain, it mainly brings about the formation of prismatic texture component (c-axis//TD, transverse direction). At large plastic deformation, the competition between basal slip and pyramidal slip is responsible for the concentration of tilted basal poles towards ND within all deformed samples. The larger difference is between the activities of basal slip and pyramidal slip, the smaller separation is between these two tilted basal poles. Besides, VPSC modeling overestimates volume fractions of {101¯2} ET in samples with angle of 0 to 30° between loading direction and RD of sheet because interactions between twin variants are not included in VPSC modeling procedure at the present form. In addition, as compatible deformation between individual grains cannot be considered in VPSC modeling, the predicted volume fractions of {101¯2} ET in samples with angle of 45 to 90° between loading direction and RD of sheet are smaller than the correspondingly measured results.

Texture Adjustment Approach of Magnesium Alloys Via Variable Strain Path Calculated by an Integrated Finite Element-Viscoplastic Self-Consistent Model

Adjusting Approaches of Basal Texture for Improvement of Tension-Compression Asymmetry in Extruded Magnesium Alloys

Effects of extrusion die cavity on the texture components and the associated mechanical properties for ZK60 magnesium alloy

Multi-scale Modelling of Evolving Plastic Anisotropy During Al-alloy Sheet Forming

Crystal Plasticity Modeling of Texture Evolution and Heterogeneity in Equal Channel Angular Pressing of Aluminum Single Crystal

Effect mechanism of texture orientation on mechanical properties and Hall-Petch relationship of CVCDE AZ31 magnesium alloy via crystal plastic finite element method (CPFEM)

Mechanical response and texture evolution prediction of AZ31 magnesium alloy during CVCDE process using crystal plasticity finite element method

Investigation of the Alloying Effect on Deformation Behavior in Mg by Visco-Plastic Self-Consistent Modeling

Improving the tension-compression asymmetry of ZK61 magnesium alloy through texture optimization in combined extrusion

Tensile mechanical behavior and texture evolution of the weak texture Mg–1Al–0.5Mn–0.3Gd magnesium alloy

Texture Evolution During Dynamic Recrystallization in a Magnesium Alloy at 450 °C

Simulation Study on the Texture Evolution Mechanism of Magnesium Alloy Cylindrical Parts with Inner Ribs During Hot Power Spinning

Effect of Stress State on Plastic Behavior, Deformation Mechanism and Texture Evolution of an Mg-Gd-Y Alloy: Experiment and Multi-Scale Simulation

Effect of Local Strains on the Texture and Mechanical Properties of AZ31 Magnesium Alloy Produced by Continuous Variable Cross-Section Direct Extrusion (CVCDE)

Achieving High Ductility and Low In-Plane Anisotropy in Magnesium Alloy Through a Novel Texture Design Strategy

Crystal Plasticity Finite Element Modelling of the Extrusion Texture of A Magnesium Alloy

Effects of Deformation Mechanisms on Texture Evolution and Mechanical Response of the Mg-1Al-0.5Mn-0.3Gd Alloy Under Plane Tension

Combined-extrusion techniques for fabricating yield-symmetric ZK61 magnesium alloys rods focusing on texture influence on their mechanical responses

Research on Deformation Mechanism of AZ31 Magnesium Alloy Sheet with Non-Basal Texture During Uniaxial Tension at Room Temperature: A Visco-Plastic Self-Consistent Analysis

Texture Evolution and Deformation Activity of an Extruded Magnesium Alloy: Effect of Yttrium and Deformation Temperature

Polycrystal plasticity simulation of extrusion of a magnesium alloy round bar: Effect of strain path non-uniformity