Abstract:The relationship between activities of involved deformation mechanisms and the evolution of microstructure and texture during uniaxial tension of AZ31 magnesium alloy with a rare non-basal texture has been thoroughly investigated in the present study by means of electron backscattered diffraction (EBSD) measurement and visco-plastic self-consistent (VPSC) modeling. These results show that except basal slip and prismatic slip, {101¯2} extension twin (ET) also plays a significant role during plastic deformation. With the increasing tilted angle between loading direction and rolling direction (RD) of sheet, the activity of {101¯2} ET possesses a decreasing tendency and its role in plastic deformation changes from the one mainly sustaining plastic strain to the one mainly accommodating local strain between individual grains. When {101¯2} ET serves as a carrier of plastic strain, it mainly results in the formation of basal texture component (c-axis//ND, normal direction). By comparison, when the role of {101¯2} ET is to accommodate local strain, it mainly brings about the formation of prismatic texture component (c-axis//TD, transverse direction). At large plastic deformation, the competition between basal slip and pyramidal slip is responsible for the concentration of tilted basal poles towards ND within all deformed samples. The larger difference is between the activities of basal slip and pyramidal slip, the smaller separation is between these two tilted basal poles. Besides, VPSC modeling overestimates volume fractions of {101¯2} ET in samples with angle of 0 to 30° between loading direction and RD of sheet because interactions between twin variants are not included in VPSC modeling procedure at the present form. In addition, as compatible deformation between individual grains cannot be considered in VPSC modeling, the predicted volume fractions of {101¯2} ET in samples with angle of 45 to 90° between loading direction and RD of sheet are smaller than the correspondingly measured results.

Investigation of the Alloying Effect on Deformation Behavior in Mg by Visco-Plastic Self-Consistent Modeling

Numerical simulation of plastic behavior and meso inhomogeneous deformation in AZ31 Mg alloy

Constitutive Modeling of Slip, Twinning and Detwinning for Mg Alloy and Inhomogeneous Evolution of Microstructure

Modeling the Deformation Behavior of A Rolled Mg Alloy with the Evpsc-Tdt Model

Grain-size effect on the deformation of Mg–3Al–3Sn alloy: Experiments and elastic-viscoplastic self-consistent modeling

Deformation behavior of Mg-8.5wt.%Al alloy under reverse loading investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent modeling

Investigation of the In-Plane Mechanical Anisotropy of Magnesium Alloy AZ31B-O by VPSC–TDT Crystal Plasticity Model

Numerical Investigation Of Secondary Deformation Mechanisms On Plastic Deformation Of Az31 Magnesium Alloy Using Viscoplastic Self-Consistent Model

Study on the deformation behavior of AZ31B-O magnesium alloy with the VPSC model

Effects of Deformation Mechanisms on Texture Evolution and Mechanical Response of the Mg-1Al-0.5Mn-0.3Gd Alloy Under Plane Tension

Self-Consistent Crystal Plasticity Modeling of Slip-Twin Interactions in Mg Alloys

A Combined Electron Backscattered Diffraction and Visco-Plastic Self-Consistent Analysis on the Anisotropic Deformation Behavior in A Mg-Gd-Y Alloy

Effect of Local Strains on the Texture and Mechanical Properties of AZ31 Magnesium Alloy Produced by Continuous Variable Cross-Section Direct Extrusion (CVCDE)

Optimization of a Viscoplastic Self-Consistent Model and Study on Compression Anisotropy of Rare Earth Magnesium Alloys

Research on Deformation Mechanism of AZ31 Magnesium Alloy Sheet with Non-Basal Texture During Uniaxial Tension at Room Temperature: A Visco-Plastic Self-Consistent Analysis

In-situ SEM and EBSD Investigation of the Deformation Behavior of Extruded Mg-6Al-1Zn-1.1Sc Alloy

Mg-3Al-1Zn alloy deformed along different strain paths: Role of latent hardening

Effect of Stress State on Plastic Behavior, Deformation Mechanism and Texture Evolution of an Mg-Gd-Y Alloy: Experiment and Multi-Scale Simulation

Revealing the dynamic recrystallization mechanism, extrusion deformation mechanism, and tensile deformation behavior of Mg–6Al–1Zn–1.1Sc alloy

Study on Deformation Behavior of High Ductility Mg-2Gd-0.5Mn Alloy During Tensile Process

Research on deformation mechanism of AZ31 magnesium alloy during uniaxial compression