Abstract:This work managed the extrusion strain path by designing various extrusion die cavities, successfully realizing the texture modification for the ZK60 magnesium alloy. The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated. Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens, but did not produce too large microstructure differences. By comparison, significant texture differences developed owing to the various extrusion die cavities, which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND. Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity. The results from the finite element analysis and the visco-plastic self-consistent model indicated that, in order to accommodate the different strain components induced by the extrusion die cavities, slip systems or tension twinning were activated differently, and this was the critical reason causing the above texture differences. One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress. Additionally, the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation, and the former generally produced the lower yield stress and the increasing stage of strain hardening rate, while the latter produced the higher yield stress and the continuous decline of strain hardening rate.

Combined-extrusion techniques for fabricating yield-symmetric ZK61 magnesium alloys rods focusing on texture influence on their mechanical responses

Improving the tension-compression asymmetry of ZK61 magnesium alloy through texture optimization in combined extrusion

Microstructure and texture evolution during compression-extrusion process for tension/compression symmetrical ZK61 magnesium alloy rod

Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression

Reducing the Tension-Compression Yield Asymmetry in an Extruded ZK60 Alloy by Ultrafine Grains

Reducing the cyclic tension-compression asymmetry and cyclic hardening of ZK61 magnesium alloy via the compression-extrusion process

Improvement of Tension/compression Asymmetry for High-Performance ZK61 Magnesium Alloy Rod Via Tailoring Deformation Parameters: Upsetting-extrusion Temperature and Upsetting Ratio

Asymmetric Tension-Compression Mechanical Behaviors of Extruded Mg-4.58Zn-2.6Gd-0.18Zr Alloy with Double-Peak Fiber Texture

Effects of extrusion die cavity on the texture components and the associated mechanical properties for ZK60 magnesium alloy

Ex-situ EBSD Analysis of Yield Asymmetry, Texture and Twinning Development in Mg–5Li–3Al–2Zn Alloy During Tensile and Compressive Deformation

Effects Of Texture And Grain Size On The Yield Strength Of Zk61 Alloy Rods Processed By Cyclic Extrusion And Compression

Adjusting Approaches of Basal Texture for Improvement of Tension-Compression Asymmetry in Extruded Magnesium Alloys

Effect of Machining Techniques on Tension-compression Yield Asymmetry of AZ61Magnesium Alloy

Improved Tension/compression Asymmetry Achieved in High-Strength Magnesium Alloys Via Compression-Extrusion Process

Formation of Gradient Microstructure and Elimination of Tension-Compression Yield Asymmetry of the Extruded Mg-4.58Zn-2.6Gd-0.18Zr Alloy Via Free-End Torsion

Improving Low-Cycle Fatigue Life of ZK61 Magnesium Alloy Via Basal Texture Weakening by the Compression-Extrusion Process

Role of One Direction Strong Texture in Stretch Formability for ZK60 Magnesium Alloy Sheet

Anisotropic Plastic Deformation Behavior of As-Extruded ZK60 Magnesium Alloy at Room Temperature

Formation of the Elliptical Texture and Its Effect on the Mechanical Properties and Stretch Formability of Dilute Mg-Sn-Y Sheet by Zn Addition

Effects of extrusion ratio and subsequent heat treatment on the tension-compression yield asymmetry of Mg-4.58Zn-2.6Gd-0.18Zr alloys

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation