Abstract:<p>An experimental study is conducted to investigate the multi-length scale evolution from micro/nano-structural arrays to V-grooves by femtosecond laser-irradiations, considering the effects of laser polarization and the number of scans on the periodic features and the micro/nano-structures. It is found that the evolution from micro/nano-structural arrays to V-grooves is gradual as the laser fluence, scan speed or the number of scans is increased. Laser-induced surface instability, hatching effects, Coulomb explosions, melting, and evaporation are found to be the underlying mechanisms for the micro/nano structural formation. As the laser fluence increases, the agglomerated nanoparticles change from sparse to dense, so that the boundary between the LIPSS (laser-induced periodic surface structures) becomes less obvious. The oxygen (O) elements attached to the surface of nanoparticles increase with an increase in laser fluence. A high-spatial-frequency LIPSS (HSFL) can transform to low-spatial-frequency LIPSS (LSFL) as the laser fluence excesses the ablation threshold, while the spatial period of the HSFL and LSFL is independent of fluence. It is shown that the irradiated surface evolves from a near-damage-free zone to one with a recast layer and thermal-induced micro-cracks, defined as heat-affected zones (HAZ). Near thermal damage-free micro/nano-structural arrays with different orientations on the sidewalls of the grooves are fabricated at close to the laser ablation threshold by multi-pass scanning. A self-organizing model is developed which shows that laser polarization leads to the asymmetry of energy distribution and the structural array is arranged along the main direction of energy flow. The model analysis shows a good agreement with experimental results and provides an efficient means to understand the interaction between femtosecond laser and silicon carbide (SiC).</p>

Kinetic Effect-Dependent Seaweed Formation in Single-Crystal Al-2 Wt Pct Si Alloy by Laser Surface Remelting

Anisotropy-dependent seaweed growth during directional solidification of Al-4.5%Cu single crystal

Phase-field simulation of seaweed-like growth morphology of directionally solidified Ni-Cu alloy

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Tip Splitting Dynamics in Degenerate Seaweed Patterns of Aluminum Alloys Induced by Anisotropic Surface Tension

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Formation of seaweed morphology and enhancing mechanical properties of an A356 alloy by directional solidification

Development of Microstructures in Laser Surface Remelting of Dd2 Single Crystal

Effect of oblique angle on the formability, crystal growth behavior and microstructure in laser direct energy deposited thin-wall structure of single-crystal superalloy

Numerical study of growth competition between twin grains during directional solidification by using multi-phase field method

The Influence of Metastable Cellular Structure on Deformation Behavior in Laser Additively Manufactured 316L Stainless Steel

Crystallography and Interface Structures in As-Arc Melted and Laser Surface-Remelted Aluminum–Silicon Alloys with and without Strontium Addition

Effects of Scanning Speed on Microstructure in Laser Surface-Melted Single Crystal Superalloy and Theoretical Analysis

Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation

Electronic Properties and Carrier Dynamics at the Alloy Interfaces of WS 2 x Se 2−2 x Spiral Nanosheets

Molecular Dynamic Simulation of Non-Melt Laser Annealing Process

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

The effect of surface texturing on the laser-induced wetting behavior of AlSi5 alloy on Ti6Al4V alloy

Microstructure Prediction of Laser Surface Remelting Zone of Single Crystal Alloy Dd2

The effect of a remelting treatment scanning strategy on the surface morphology, defect reduction mechanism, and mechanical properties of a selective laser-melted Al-based alloy

EFFECTS OF CRYSTAL ORIENTATION ON MICROSTRUCTURES OF MOLTEN POOL DURING LASER SURFACE REMELTING