Abstract:Laser directed energy deposition process shows a tremendous potential to additively repair and manufacture single-crystal components in a near-net shape. For the specific non-vertical structure such as the tilted and torsional sidewalls of single-crystal components, achieving complete monocrystalline nature in the manufactured zone is still a great challenge and hazy. In this study, oblique thin-wall structures of single-crystal superalloy were fabricated by coaxial laser directed energy deposition process. The effect of oblique angle on the formability, crystal growth behavior and microstructure formation in thin-wall structures of single-crystal superalloy was discussed. The results showed that the critical oblique angle for good formability of thin-wall structure is 30°. A poor-quality and shapeless deposited bead forms once the oblique angle researches 40°. The thin-wall structure inherits the [001]/<100> crystalline orientation from parent single-crystal substrate through the continuous epitaxial growth of ultrafine columnar dendrites. The competition and alternate development of primary trunks-secondary arms-tertiary arms achieve the multiplication and reproduction of ideal columnar dendrites along the [001]/<100> crystalline orientation in the overhanging region of the thin-wall structure. Periodic segregation forms among the columnar dendrites. Epitaxial-growth continuity of the columnar dendrites with consistent crystalline orientation of substrate can be successfully achieved in large-scale tilted and torsional thin-wall structures of single-crystal superalloy with proper processing parameters. These findings are of great importance in the microstructure control for additively manufacturing complex single-crystal components by laser directed energy deposition process.

Effects of Scanning Speed on Microstructure in Laser Surface-Melted Single Crystal Superalloy and Theoretical Analysis

Effects of laser scanning speed and building direction on the microstructure and mechanical properties of selective laser melted Inconel 718 superalloy

Development of Microstructures in Laser Surface Remelting of Dd2 Single Crystal

Microstructure Prediction of Laser Surface Remelting Zone of Single Crystal Alloy Dd2

Effect of Scanning Strategies on the Microstructure and Mechanical Properties of Ti-22Al-25Nb Alloy Fabricated through Selective Laser Melting

Effect of laser scanning speed on microstructure, tribological and corrosion behavior of Ti 23Nb alloys produced by laser metal deposition

Effect of ultra-high-speed laser melting deposition process on performance of Al-Mg-Sc high-strength aluminum alloy

A Synchrotron Study of Microstructure Gradient in Laser Additively Formed Epitaxial Ni-based Superalloy

Effects of melt-pool geometry on grain structure evolution in multilayer laser metal deposition of a single-crystal superalloy

Effect of oblique angle on the formability, crystal growth behavior and microstructure in laser direct energy deposited thin-wall structure of single-crystal superalloy

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

Prediction of solidification microstructure of titanium aluminum intermetallic alloy by laser surface remelting

Effect of Scanning Speed on Structure and Properties of Laser Cladding of 45 Steel

Thermal behavior and microstructural evolution of additively manufactured Ni-based superalloys via multi-scale simulation

Influence of Scanning Speed on the Microstructure and Wear Resistance of Laser Alloying Coatings on Ti-6Al-4V Substrate

Transformation microstructure and nucleation crystallography in high Sc-contained Al–Sc alloys after laser treatment

Microstructure and mechanical properties of laser-assisted epitaxial growth of nickel-based single crystal superalloys

Optimizing solidification dendrites and process parameters for laser powder bed fusion additive manufacturing of GH3536 superalloy by finite volume and phase-field method

Cellular Spacing of Cu-Mn Alloy under Ultrahigh Temperature Gradient and Rapid Directional Solidification

Study On Cracks And Microstructures Of Ic10 Single Crystal Superalloys By Laser Welding

Rapid directional solidification with ultra-high temperature gradient and cellular spacing selection of Cu-Mn alloy