Abstract:Laser directed energy deposition process shows a tremendous potential to additively repair and manufacture single-crystal components in a near-net shape. For the specific non-vertical structure such as the tilted and torsional sidewalls of single-crystal components, achieving complete monocrystalline nature in the manufactured zone is still a great challenge and hazy. In this study, oblique thin-wall structures of single-crystal superalloy were fabricated by coaxial laser directed energy deposition process. The effect of oblique angle on the formability, crystal growth behavior and microstructure formation in thin-wall structures of single-crystal superalloy was discussed. The results showed that the critical oblique angle for good formability of thin-wall structure is 30°. A poor-quality and shapeless deposited bead forms once the oblique angle researches 40°. The thin-wall structure inherits the [001]/<100> crystalline orientation from parent single-crystal substrate through the continuous epitaxial growth of ultrafine columnar dendrites. The competition and alternate development of primary trunks-secondary arms-tertiary arms achieve the multiplication and reproduction of ideal columnar dendrites along the [001]/<100> crystalline orientation in the overhanging region of the thin-wall structure. Periodic segregation forms among the columnar dendrites. Epitaxial-growth continuity of the columnar dendrites with consistent crystalline orientation of substrate can be successfully achieved in large-scale tilted and torsional thin-wall structures of single-crystal superalloy with proper processing parameters. These findings are of great importance in the microstructure control for additively manufacturing complex single-crystal components by laser directed energy deposition process.

Effects of melt-pool geometry on grain structure evolution in multilayer laser metal deposition of a single-crystal superalloy

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

Studies of the Influence of Beam Profile and Cooling Conditions on the Laser Deposition of a Directionally-Solidified Superalloy

Effect of oblique angle on the formability, crystal growth behavior and microstructure in laser direct energy deposited thin-wall structure of single-crystal superalloy

Effects of Scanning Speed on Microstructure in Laser Surface-Melted Single Crystal Superalloy and Theoretical Analysis

EFFECTS OF CRYSTAL ORIENTATION ON MICROSTRUCTURES OF MOLTEN POOL DURING LASER SURFACE REMELTING

A new strategy to inhibit stray grain formation during laser directed solidification of single crystal superalloys

Optimizing solidification dendrites and process parameters for laser powder bed fusion additive manufacturing of GH3536 superalloy by finite volume and phase-field method

Evolutionary Mechanism of Solidification Behavior in the Melt Pool during Disk Laser Cladding with 316L Alloy

Microstructure Prediction of Laser Surface Remelting Zone of Single Crystal Alloy Dd2

Development of Microstructures in Laser Surface Remelting of Dd2 Single Crystal

Morphological Development of Sub-Grain Cellular/Bands Microstructures in Selective Laser Melting

Crystal growth for different substrate orientations during laser directed solidification of single crystal superalloys

Effect of layer thickness on the melt pool behavior and pore defects evolution of selective laser melting CuCrZr alloy

Investigating the Effects of Powder Feeding Rate on Microstructure Transformation in Linear Laser Beam Additive Manufactured Thick-Walled Structures

Effect of the Boundary Orientation of Melt Pool on Mechanical Property and Fracture Path in Selective-Laser-Melted AlSi10Mg Alloy

Effect of molten pool flow and recoil pressure on grain growth structures during laser powder bed fusion by an integrated model

Development of the molten pool and solidification characterization in single bead multilayer direct energy deposition

Laser printing path and its influence on molten pool configuration, microstructure and mechanical properties of laser powder bed fusion processed rare earth element modified Al-Mg alloy

Phase-Field Study of Polycrystalline Growth and Texture Selection During Melt Pool Solidification

Investigation of columnar to equiaxial transition criterion and solidification conditions for Ni-based superalloy in laser powder bed fusion