Abstract:Successive approximation register (SAR) analog-to-digital converters (ADC) have the advantages of a simple structure, low power consumption and a small area compared with other types of ADCs, and thus, high-performance SAR ADCs have always been a hot research topic in the industry. In this paper, a 12-bit SAR ADC design with calibration using a hybrid RC digital-to-analog converter(RC DAC) structure is proposed to improve the conversion accuracy of the ADC and reduce the circuit area at the same time. The analog supply voltage and reference voltage of the ADC are 3.3 V, and the digital supply voltage is 1.2 V. The ADC adopts a mixed digital–analog design scheme, in which the internal comparator, latch, DAC capacitor array, etc., are analog parts, and the rest of the SAR algorithms and calibration algorithms are all implemented in digital Verilog code, with a conversion accuracy of 0.8 mV and a calibration accuracy of 0.5 LSB. The ADC can be selectively calibrated, and the simulation shows that the accuracy of the calibrated ADC can be guaranteed to be within 2 LSB under a 14 MHz digital clock with a sampling rate of 1 MHz. After simulation at a sampling rate of 1 MHz and an input frequency of 244 Hz sine wave, the effective bit count of the ADC is 9.54 bits and the SFDR is 63.71 dB. The circuit consumes 1.78 mW with a 3.3 V supply voltage. The overall layout core area is 411 μm × 517 μm.

A ENOB 10.3 Bit, 103 Μw ON-CHIP CALIBRATION SAR ADC

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A Front-End Circuit With 16-Channel 12-Bit 100-Ksps Rc-Hybrid Sar Adc For Industrial Monitoring Application

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

An 11-Bit ENOB,accuracy-programmable,and Non-Calibrating Time-Mode SAR ADC

A High ENOB 14-Bit ADC without Calibration

Design of a 0.005mm 2 8.5enob 14.9 Fj/conv-Step SAR ADC for Biomedical Application

A 0.3V 10b 3MS/s SAR ADC With Comparator Calibration and Kickback Noise Reduction for Biomedical Applications

An 18-Bit SAR ADC with Mixed DAC and Capacitive Recombination Calibration

A 10.5-B ENOB 645 Nw 100ks/s SAR ADC with Statistical Estimation Based Noise Reduction

Design of a 12-Bit SAR ADC with Calibration Technology

A 10-Bit 16-Ms/s Ultra Low Power SAR ADC for IoT Applications

A 10-Bit 1ms/s Low Power SAR ADC for RSSI Application

A 12-b 100MS/s low-power successive approximation register ADC in 65nm COMS

A Non-binary High Power-efficiency SAR ADC

A 0.024 Mm<sup>2</sup> 4.9 Fj 10-Bit 2 MS/s SAR ADC in 65 Nm CMOS

A 1-V 560-Nw SAR ADC with 90-Db SNDR for IoT Sensing Applications