Abstract:High-speed ADCs are key blocks for ADC-based serial links [1]. The SAR ADC is credited for its high energy efficiency while speedup is a challenge. One limiting factor to the SAR ADC speed is metastability. Traditional solutions have to lengthen the time or speed up the comparator for metastability tolerance, leading to a trade-off between speed and power consumption. A better way to solve metastability is by monitoring the comparison time of the comparator <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$(\mathrm{t}_{\text{comp}})$</tex> and correcting codes. Prior research [2] extracts an additional bit of code from metastability by detecting <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> . However, since the <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> is sensitive to the input common-mode voltage (VCM), VCM-based switching is a must to ensure the accuracy of the obtained 1-bit code, which limits the speed of [2] to 700MS/s with 6b resolution. This work acquires two-bit codes from metastability and further accelerates the conversion. An on-chip self-tuning delay is adopted to ensure the accuracy of the extra 2 bits against PVT changes. This work also employs a bi-directional switching logic to speed up conversion and a proper comparator structure to minimize the impact of VCM changes. Thanks to the technique mentioned above, this work achieves 47. 2dB SNDR at 1GSs} with a Nyquist input. The 8b SAR ADC consumes 4. 15mW and 0.0032mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> including on-chip self-tuning delay, leading to a Walden FoM of 22.23fJ/conv.-step.

A 10.5-B ENOB 645 Nw 100ks/s SAR ADC with Statistical Estimation Based Noise Reduction

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A SAR ADC with Reduced kT/C Noise by Decoupling Noise PSD and BW

A 0.7-V 0.6- $\mu \text{w}$ 100-Ks/s Low-Power SAR ADC with Statistical Estimation-Based Noise Reduction

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 10 MS/s 10 bit SAR A/D Converter in RF System

A 10-Bit 400-KS/s Low Noise Asynchronous SAR ADC with Dual-Domain Comparator for Input-Referred Noise Reduction

A Low Power Noise-Shaping SAR ADC with Improved Integrator and Hybrid DAC Mismatch Mitigation Technique

A 1.5fJ/conv-step 10b 100kS/s SAR ADC with gain-boosted dynamic comparator

An 11-Bit 500 MS/s Two-Step SAR ADC with Non-Attenuated Passive Residue Transfer.

A 10-B 750µw 200ms/s Fully Dynamic Single-Channel SAR ADC in 40nm CMOS

A 68.36 dB 12 bit 100MS/s SAR ADC with a low-noise comparator in 14-nm CMOS FinFet

An 8b 1GS/s SAR ADC with Metastability-Based Resolution/Speed Enhancement and Self-Tuning Delay Achieving 47.2dB SNDR at Nyquist Input.

A Second-Order Noise-Shaping SAR ADC with Passive Integrator and Tri-Level Voting

A 13 Bit 100 MS/s SAR ADC with 74.57 Db SNDR in 14-Nm CMOS FinFET.

A 10-b 750 mu W 200MS/s Fully Dynamic Single-Channel SAR ADC in 40nm CMOS

A 68 uW 31 kS/s Fully-Capacitive Noise-Shaping SAR ADC with 102 dB SNDR

A 12-Bit ENOB 8mhz BW Noise-Shaping SAR ADC Using High-Speed Switches.

A 20khz 87.2db SNDR 12.1µw NS SAR ADC Based on Quantization-Error-Matched RLSB-First Algorithm

A 13-ENOB Second-Order Noise-Shaping SAR ADC Realizing Optimized NTF Zeros Using the Error-Feedback Structure

A 12B-Enob 61µw Noise-Shaping SAR ADC with a Passive Integrator