Abstract:A four‐in‐one sensor integrating hydrogen sensing technology using palladium nickel alloy, pressure sensing technology, wide range temperature sensing, and micro water measurement technology was developed. A three‐in‐one integrated sensor based on micro current detection technology was developed to realize online monitoring of bushing physical, chemical, and electrical parameters. In order to monitor the state of bushing online, an intelligent monitoring system for transformer bushing was developed. A four‐in‐one sensor integrating hydrogen sensing technology using palladium nickel alloy, pressure sensing technology, wide range temperature sensing, and micro water measurement technology was developed. A three‐in‐one integrated sensor based on micro current detection technology was developed to realize online monitoring of bushing dielectric loss, capacitance, and partial discharge. The test results show the hydrogen measurement range of sensor is 0 to 10,000 μL/L, and the measurement uncertainty is lower than 10% or 10 μL/L. The pressure measurement range is 0 to 1.0 MPa, and the uncertainty is lower than 0.3%. The temperature measurement range is −40°C to 85°C, and the uncertainty is lower than ± 1°C. The micro water measurement range is 0 to 1000 μL/L, and the measurement uncertainty is lower than ± 5% or 10 μL/L. The dielectric loss and capacitance error increased by one order of magnitude compared to current standards. The resolution of partial discharge is 5 pC. The performance of the device fully satisfies the requirements for online monitoring of transformer bushing. It has been installed in dozens of 330 and 750 kV substations, providing a reliable guarantee for safe operation of transformer bushing.

Detection of Load Loss of Large Capacity Transformer

The On-Line Detecting Method for Transformer Loss

Study of On-Line Detecting System for Capacity and Loss of Distribution Transformer

Wireless Monitoring And Analysing System Of Dissolved Gases In The Transformer Oil

On-line Detecting Method of Transformer Open-circuit Loss and Short-circuit Loss

A Simple Power Loss Evaluation Method for High-Frequency Transformers Based on Surface Temperature Measurement Within Wide Operation Range

New Stationary on Line Discharge Monitoring System for Power Transformers

A vibration based condition monitoring system for power transformers

Detecting the Capacity of Distribution Transformer Based on an On-Line Method

Development of a Comprehensive Transformer Material System Analyzer

Condition Monitoring Technology of Transformer with Multiple Sensing Methods United

A new detecting method of break in secondary circuit of current transformer in micro-based differential protection of power transformer

Intelligent monitoring of EHV transformer bushing based on multi‐parameter composite sensing technology

Design of Intelligent Sensing System for Insulation State of Power Transformer Based on Moisture Content

On-line multi-sensor monitoring system for insulation condition of oil-immersed power transformer

Transformer Monitoring with Electromagnetic Energy Transmission and Wireless Sensing

Design of Portable Transformer Vibration Monitoring and Fault Diagnosis System

Research on On-line Monitoring and Regulation Technology of Pressure of High Voltage Transformer

Design of On-Line Monitoring System for Power Transformer Based on Vibration Analysis Method

Test and Analysis on Extended Temperature Rise of 110 kV Transformer Based on Distributed Temperature Sensing

Online Monitoring of Power Cables Tangent Delta Based on Low-Frequency Signal Injection Method