Abstract:During the mechanical loading and unloading process, Tb-Dy-Fe giant magnetostrictive materials can dissipate a mass of elastic energy due to the irreversible movements of non -180° domain walls, which is of interest to be applied in passive damping control systems. The magne-tomechanical damping capacity of Tb-Dy-Fe compound is strongly sensitive to the stress magnitude as well as the external magnetic fields. As a new member of the Tb-Dy-Fe family, quaternary Tb0.36Dy0.64 (Fe0.85Co0.15)2 compound has been developed as a good candidate in wide operating temperature range applications. In order to realize the application of Tb0.36Dy0.64 (Fe0.85Co0.15)2 compound in passive damping control system, it is important to systemically investigate its damping capacity under coupled magnetomechanical loadings. In the present work, <110> oriented Tb0.36Dy0.64 Fe0.85Co 0.15 crystal was prepared with a growth velocity of 480 mm/h by zone melting directional solidification method. The damping capacity was studied by quasi-static stress-strain measurements under a series of constant magnetic fields up to 0.325 T. Stress ranges from 0 to -10, -30 and -50 MPa were used at room temperature. The results show that maximum damping capacity (AW/W) is obtained at zero field. Under certain stress amplitude am, AW/W decreases with the increase of magnetic field. A critical magnetic field exists in the damping capacity-magnetic field (AW/W-H) curves, and seems independent on the stress magnitude. Under coupled magnetic-stress loadings, the magnetostriction-magnetization curves were measured to analyze the switching process of domains and movements of domain walls, by which an explanation on the variation of damping capacity was given.

Preparation of Terfenol-D Spherical Single-Crystal Particles and Study of Magnetostrictive Properties of Its Composites at Low Fields

Microstructural, magnetic and magnetostrictive properties of Tb 0.3Dy0.7Fe1.95 prepared by solidification in a high magnetic field

Magnetostriction Increase of Tb0.3dy0.7fe1.95 Alloy Prepared by Solidification in High Magnetic Fields

Design and Large Magnetostriction of Tb0.34Dy0.56Pr0.1Fe1.9/epoxy Composite Containing Near-Spherical Single-Crystal Particles

Effects of manganese substitution on magnetic and magnetostrictive properties of Tb0.5Dy0.5(Fe1-xMnx)1.92/epoxy composites with spherical single-crystal particles*

Magnetostriction Of Tbfe2-Based Alloy Treated In A Semi-Solid State With A High Magnetic Field

Effect of Cooling Rate on Crystal Orientation, and Magnetic and Magnetostrictive Properties of TbFe2-Based Alloy Treated in Semisolid State under a High Magnetic Field

Giant Magnetostriction in TbDyFe/epoxy Composites with Spherical Single-Crystal Particles

Effects of High Magnetic Fields on the Crystal Orientation and Magnetostriction of a TbFe2 Based Alloy During Treatment in the Semi-Solid State

High-performance magnetostrictive composites with large particles volume fraction

Fabrication of Tb0.3Dy0.7Fe2/epoxy composites: Enhanced uniform magnetostrictive and mechanical properties using a dryprocess

In-situ Studies of Low-Field Large Magnetostriction in Tb1−xDyxFe2 Compounds by Synchrotron-Based High-Energy X-Ray Diffraction

MAGNETOELASTIC PROPERTIES DEPENDENCE ON COMPRESSIVE STRESS IN 〈110〉 ORIENTED Tb0.45Dy0.55Fe1.95 POLYCRYSTALLINE ALLOYS WITH HIGH DRIVE LEVELS

Study on the melt-textured technique in a magnetic field for giant magnetostrictive materials R–Fe alloy

Magnetostriction of a (110) oriented Tb0.3Dy0.7Fe1.95 polycrystals annealed under a noncoaxial magnetic field

Study on the Preparation Techniques and Properties of Bonded Magnetostrictive Materials

Magnetostriction and hysteresis of (110) oriented Tb0.29Dy0.48Ho0.23Fe2 single crystal

Ferromagnetic and Magnetostrictive Properties of Tb0.3Dy0.7(Co1−xFex)2alloys

Magnetic Properties of Composites of Tb 0.28 Dy 0.72 Fe 2 and Polyvinylidene Fluoride

Structure and magnetic properties of mechanically alloyed Tb0.7Pr0.3(Fe0.9B0.1)1.93 and the magnetostriction of its epoxy composites

Magnetomechanical damping capacity of (110) oriented Tb0.36Dy0.64 (Fe0.85Co0.15)2 alloy