Abstract:As the main gel material of concrete, cement is used in an astonishing amount every year in the construction industry. However, a large amount of CO 2 is emitted into the atmosphere while producing cement. Therefore, it is the general trend to look for substitutes for cement and develop new green concrete. Lithium slag (LS) is the industrial waste discharged from lithium salt plants. Through testing, it is found that the chemical composition of LS has a high degree of coincidence with ordinary Portland cement (OPC) Therefore, LS can be incorporated into concrete as supplementary cementations material (SCM) to prepare lithium slag concrete (LSC). The pollution of the natural environment caused by a large number of piled-up and landfilled LS is immeasurable. Consuming and using LS in large quantities and with high efficiency not only eliminates the pollution of lithium slag to the natural environment, but also helps to reduce the amount of cement used in green concrete and truly reuse waste resources. In order to study the mechanical properties of post-heated LSC, the test were carried out for LSC specimens after high-temperature. The main influence factors were considered, including the temperatures of 20°C, 100 °C, 300 °C, 500 °C and 700 °C, the contents of lithium slag in LSC of 0%, 10%, 20% and 30%, cooling method of LSC after exposure high temperature. The results showed that the mechanical properties of LS concrete specimens were slightly improved at 100 °C, and when the temperature was 300 °C or higher, the damage to the specimens was huge and irreversible. An appropriate amount of LS (20% lithium slag content) could improve the strength of LSC. This paper also studied the relationship between lithium slag content and strengths of LS concrete. The research results show that adding an appropriate amount of LS to concrete improves the mechanical properties of concrete. When the LS replacement rate is 20%, the mass loss rate of LSC after different high temperature treatments was the minimum. The cubic compressive strength, axial compressive strength, and flexural strength of specimens with 20% LS substitution can be increased by 8.16%, 8.33%, and 13.46% after high temperature. The cubic compressive strength, axial compressive strength, and flexural strength of specimens with 20% LS substitution can be increased by 8.16%, 8.33%, and 13.46% after high temperature.

Effects of Thermal Activation on the Hydration Performance of Lithium Slag-Cement Composite Binder

Thermal Activation Mechanism and Activity Evaluation of Lithium Slag: Insights from Simulated Hydration

Activation and Toxicity of Slag-fly Ash-fluorgypsum Cementitious Material

Utilization of lithium slag as an admixture in blended cements: Physico-mechanical and hydration characteristics

Effects of C-S-Hs-PCE and Na2SO4 on Hydration Behavior of Cement-Lithium Slag Binder

Impacts of C-S-Hs-PCE and Na2SO4 on Hydration Properties of Lithium Slag-Cement Composite Binder

Fluidity and Hydration Evolution of Cement-Ls Binder in the Function of Mg/Al-LDH-PCE

Effect of Alkali and Sulfate on the Hydration Characteristic of Cement-Based Materials Containing Coal Gasification Slag

Effect of Sodium Silicate and C-S-Hs-PCE on Properties of LS-Cement Binder

Mechanical Activation of Granulated Copper Slag and Its Influence on Hydration Heat and Compressive Strength of Blended Cement.

Mechanism and Assessment of the Pozzolanic Activity of Melting-Quenching Lithium Slag Modified with MgO

Effect of high temperature on mechanical properties of lithium slag concrete

Investigation of Synergistic Effects of Lithium Slag and Granulated Blast Furnace Slag from the Perspectives of Physics and Hydration

Preparation of Geopolymers from Thermally Activated Lithium Slag: Activity Enhancement and Microstructure

Effect of hydrated lime,anhydrite and limestone powder on performance of slag cement

A Study on the Performance of Alkali-Activated Materials Prepared by Thermochemical Treatment of Ladle Furnace Slag

Microstructures and properties of alkali-activated slags with composite activator: Effects of Na2O equivalents

Compressive Strength and Hydration Process of Sodium Carbonate-Activated Superfine Slag/marble Powder Binders

Insight to Workability, Compressive Strength and Microstructure of Lithium Slag-Steel Slag Based Cement under Standard Condition

Chemical activation of binary slag cement with low carbon footprint

Preparation for micro-lithium slag via wet grinding and its application as accelerator in Portland cement