Abstract:Purpose The purpose of this paper is to supplement and upgrade existing research on LPBF of NiTi alloys. Laser powder bed fusion (LPBF) is a promising method for fabricating nickel-titanium (Ni-Ti) alloys. It is well known that the energy density is mainly adjusted through the scanning speed and laser power. Nevertheless, there is lack in research on the effects of separately adjusting the scanning speed and laser power on the properties of the final Ni-Ti components. On the other hand, although Ni-rich Ni-Ti alloys [such as Ni54(at.%)Ti] have great potential in structural applications because of their high hardness and good shape stability, at present, there are few studies focusing on this grade of Ni-Ti alloy. Design/methodology/approach In this work, the energy density was adjusted by changing the laser power and scanning speed separately, and the corresponding process parameters were used to fabricate Ni54(at.%)Ti alloys. The formability (including the relative density, impurity content, etc.) and tensile properties of the LPBF Ni54(at.%)Ti alloys fabricated with different combinations of process parameters were analyzed. Findings The effects of increasing the laser power and reducing the scanning speed on the properties of the LPBF Ni54(at.%)Ti alloys and the property differences between components manufactured with different combinations of laser power and scanning speed under the same energy density were analyzed. The optimal process parameters were selected to fabricate the components that achieved the highest ultimate tensile strength of 537 MPa, a high relative density of 98.23%, a relatively low impurity content (0.073 Wt.% of carbon and 0.06 Wt.% of oxygen) and an ideal pseudoelasticity (95% recovery rate loaded at 300 MPa). Originality/value The effects of increasing the laser power and reducing the scanning speed on the properties of LPBF Ni54(at.%)Ti alloys were studied in this paper. This work is an upgrade and supplement to the existing research on fabricating Ni-rich Ni-Ti alloys by the LPBF method.

Improving the Compressive Properties of Laser Powder Bed Fusion Ti-6al-4v Containing Oxygen and Nitrogen by Adding Trace Tic+Tib Nanoparticles

Effects of the process parameters on the formability and properties of Ni54(at.%) Ti alloys prepared by laser powder bed fusion

Improved Strength-Ductility of Ti-6Al-4V Casting Alloys with Trace Addition of TiC-TiB2 Nanoparticles

Simultaneously Enhancing Strength and Ductility of LPBF Ti Alloy Via Trace Y2O3 Nanoparticle Addition

In-situ synthesis of high strength and toughness TiN/Ti6Al4V sandwich composites by laser powder bed fusion under a nitrogen-containing atmosphere

Microstructure and mechanical properties of in-situ hybrid reinforced (TiB+TiC)/Ti composites prepared by laser powder bed fusion

Laser Powder Bed Fusion Of Mo2c/Ti-6al-4v Composites With Alternately Laminated Alpha '/Beta Phases For Enhanced Mechanical Properties

Laser Powder Bed Fusion of CoCrNi Composite with High Fraction of TiC: the Microstructure and Mechanical Properties at Different Temperatures

Microstructure evolution and strengthening mechanisms of a high-performance TiN-reinforced Al-Mn-Mg-Sc-Zr alloy processed by laser powder bed fusion

Achieving Ultra-High Strength of Laser Powder Bed Fusion TiN Nanoparticles Reinforced AlMnMgScZr Composite Via a High Volume Density of L12-nanoprecipitates

Significant Improvement in the Strength-Toughness and Isotropy of Laser Powder Bed Fused Ti6Al4V Alloy by Combining Heat Treatment with Subsequent Laser Shock Peening

Synthesis of TiAl/Nb Composites with Concurrently Enhanced Strength and Plasticity by Powder Metallurgy

Fabrication of TiN-doped Ti Nanocomposites with High Strength and Ductility by Plasma-Assisted Ball Milling and Laser Powder Bed Fusion

Microstructure Evolution and Strengthening Mechanisms of a High-Performance TiN-reinforced Al-Mn-Mg-Sc-Zr Alloy Processed by Laser Powder B E D Fusion

Construction of Three-Dimensional Network Morphology Titanium Matrix Composites Via Adding Nano B4C: As-built and Heat-Treated Scenarios

Revealing the Precipitation Behavior of Crack-Free TiB2/Al-Zn-Mg-Cu Composites Manufactured by Laser Powder Bed Fusion

Effects of in Situ TiB2 on the Microstructural Evolution, Mechanical Properties, and Friction Behavior of the Al-Si-Cu Alloys Processed by Laser Powder-Bed Fusion

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders

Nitrogen-assisted laser-based powder bed fusion fabricated NiTi with high hardness and low modulus

A Novel Strategy to Break Through the Strength-Ductility Trade-off of Titanium Matrix Composites

Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion