Abstract:A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on the core diameter, numerical aperture (NA), and the length of the MMF section in the single-mode--multimode--single-mode (SMS) fiber structure are investigated experimentally. The results indicate that the larger core diameter of the MMF leads to higher temperature sensitivity but lower strain sensitivity (absolute values); the higher NA does not influence the temperature sensitivity but results in higher absolute value of strain sensitivity; the longer MMF section brings lower temperature sensitivity but does not have an impact on strain sensitivity. These findings also contribute to the theoretical analysis of the length dependence in the SMS fiber sensors. Besides, the results of the characterization study show that the strain sensitivity is relatively low, which brings a possibility to develop a strain-insensitive temperature sensor. The proposed sensor is used for temperature sensing while the strain is constantly applied from 0 to 1100 $\mu\epsilon$ with steps of 100 $\mu\epsilon$. The measured results are consistent with the comprehensive study. The mean temperature sensitivity is 6.14 pm/$^{\circ}$C with a standard deviation of 0.39 pm/$^{\circ}$C, which proves that the proposed temperature sensor exhibits good stability and is insensitive to strain. We expect that these results will provide a profound guideline to fiber sensors based on multimode interference.

Temperature-insensitive Strain Measurement Using a Microwave Photonic Filter Based on Chirped Fiber Bragg Gratings

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Temperature-Insensitive Strain Sensor Based on the Measurement of Reflected Bandwidth from Tapered Fiber Grating by A Scanning Fbg

Simultaneous Measurement of Strain and Temperature by Two Peanut Tapers with Embedded Fiber Bragg Grating.

Temperature and strain simultaneous sensing measurement based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating

Temperature-Strain Discrimination Sensor Using a WDM Chirped In-Fibre Bragg Grating and an Extrinsic Fabry-Pérot

High-Sensitivity Strain and Temperature Simultaneous Measurement Sensor Based on Multimode Fiber Chirped Long-Period Grating

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

Temperature-strain Discrimination Using a Wavelength-Division-multiplexed Chirped In-Fibre-bragg-grating/extrinsic Fabry-Perot Sensor System

Research on Discriminating Measurement of High-Temperature and Strain Based on In-Line MPCF-FPI Combined with a LPFG

Strain and High-Temperature Discrimination Using A Type Ii Fiber Bragg Grating and A Miniature Fiber Fabry-Perot Interferometer

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

Temperature-insensitive strain sensor based on in-line Fabry-Perot interferometer

Highly Sensitive Fiber Optic Sensing System Based on Two Fiber Bragg Gratings and Microwave Photonic Filter for Temperature Measurement

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

High-Resolution and Extended-Range Fiber Bragg Grating Sensing System Based on a Microwave Photonic Filter with Period-breaking Interrogation Method

A Compact Fiber Sensor Based on the High Birefringence Polarization Maintaining Fiber for Simultaneous Strain and Temperature Measurement

Simultaneous Measurement of Temperature and Strain Based on Fiber Loop Mirror Combined with Fiber Bragg Grating

Temperature-Insensitive Strain Sensing with a Polarization-Maintaining Photonic Crystal Fiber Based on Brillouin Dynamic Grating