Abstract:Long period fiber grating is a kind of transmission type optical fiber grating. Due to the advantages such as low insertion loss, wide bandwidth, low-level reflection, high sensitivity, low cost and ease of compactness, LPFGs have been widely applied in optical fiber sensing and optical fiber communication. The Mode coupling of LPFG is the coupling between the fiber core mode and the cladding mode in the same transmission direction. If the ordinary LPFG is combined with bitaper or taper, we can effectively change the original LPFG's transmission spectrum to obtain the composite LPFG, which can stimulate new resonant peaks in the original wavelength-dependent transmission loss of the grating basis, thus applying to the dual-parameter simultaneously measuring field. We report a novel all-fiber narrow-bandwidth intermodal Mach-Zehnder interferometer (MZI) based on a long-period fiber grating (LPFG) combined with a fiber bitaper. The LPFG is written by high-frequency CO2 laser pulses, and the bitaper is connected in series with the LPFG, forming the MachZehnder interferometer (MZI). Experimental results indicate that the MZI has good temperature sensitivity, The temperature sensitivity of the two loss peaks are 55.35pm/degrees C and 48.18pm/degrees C respectively. The strain sensitivity of the two loss peaks are 3.35pm/mu epsilon and - 4.925pm/mu epsilon respectively. By using the different temperature and strain response characteristics of the loss peaks, the temperature and strain measurement can be realized simultaneously. the proposed device has good repeatability and stability, which would be a promising candidate for precise dual-parameter sensing application.

Research on Discriminating Measurement of High-Temperature and Strain Based on In-Line MPCF-FPI Combined with a LPFG

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Pcf-Based Fabry-Perot Interferometric Sensor For Strain Measurement Under High-Temperature

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Temperature and Strain Response of In-Fiber Air-Cavity Fabry-Perot Interferometer under Extreme Temperature Condition

Cascaded FPI/LPFG Interferometer for High-Precision Simultaneous Measurement of Strain and Temperature

PCF-based Fabry-Pérot interferometric sensor for strain measurement at high temperatures

Research on Full Strain Measurement Performance of Non-intrinsic Optical Fiber F-P Sensor

High Temperature Strain Sensor Based on In-Line Fabry-Perot Interferometer Formed by Hollow-Core Photonic Crystal Fiber

Simultaneous Strain and Temperature Measurement Using Long-Period Fiber Grating Sensors

Hybrid Lpfg/Mefpi Sensor for Simultaneous Measurement of High-Temperature and Strain

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

A Temperature Self-Compensated Lpfg Sensor for Large Strain Measurements at High Temperature

Highly Integrated Fp/Fbg Sensor for Simultaneous Measurement of High Temperature and Strain

A Dual-Parameter Sensor for Strain and Temperature Measurement Featuring Cascaded LPFG-FP Structure

Simultaneous Measurement of Temperature and Strain Based on Composite Long Period Fiber Grating

Strain and High-Temperature Discrimination Using A Type Ii Fiber Bragg Grating and A Miniature Fiber Fabry-Perot Interferometer

A Composite Fabry-Perot Interferometric Sensor with the Dual-Cavity Structure for Simultaneous Measurement of High Temperature and Strain

Temperature and Strain Characteristic of Long Period Fiber Grating (LPFG) Induced by High Frequency CO2 Laser Pulses

Strain Measurement at High Temperature Environment Based on Fabry-Perot Interferometer Cascaded Fiber Regeneration Grating

Temperature-insensitive Optical Fiber Strain Sensor Fabricated by Two Parallel Connection Fabry-Perot Interferometers with Air-Bubbles