Abstract:In order to clarify on the driving force of cement long-term strength retrogression, a comprehensive quantitative X-ray diffraction (XRD) analysis were conducted on silica-enriched (60%–80% by weight of cement) cement samples set and cured under the condition of 200°C and 50 MPa with a maximum duration of 180 days. The phase content evolution with time was determined by three different methods on the average of three specimens: the external standard method; the partial or no known crystal structure (PONKCS) method; and the hybrid method. Although the specific phase content estimated by different methods varied slightly, the overall trend of change of all phases were similar. The phase transformation in set cement at high temperature condition is dependent on the slurry composition. In silica-deficient system, tobermorite and amorphous C-S-H were transformed to xonotlite; while in silica-sufficient system, tobermorite and amorphous C-S-H were transformed to gyrolite. These phase transformations involve gradual structural changes of cement hydration products, which may be the driving force of long-term strength retrogression. However, such structural changes can only be detected by XRD once the transformation is complete.

Corrigendum: Mechanism of Long-Term Strength Retrogression of Silica-Enriched Portland Cement Assessed by Quantitative X-ray Diffraction Analysis

Mechanism of long-term strength retrogression of silica-enriched Portland cement assessed by quantitative X-ray diffraction analysis

Corrigendum to: Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61

Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

Corrigendum: The Development of a Magnesium-Releasing and Long-Term Mechanically Stable Calcium Phosphate Bone Cement Possessing Osteogenic and Immunomodulation Effects for Promoting Bone Fracture Regeneration

Correction to “Effect of Adding Monohydrocalcite on the Microstructural Change in Cement Hydration”

Correction: Li et al. Recovery Behavior of the Macro-Cracks in Elevated Temperature-Damaged Concrete after Post-Fire Curing. Materials 2022, 15, 5673

WITHDRAWN: Compressive Strength, Pore Structure and Chloride Transport Properties of Alkali-Activated Slag/fly Ash Mortars

Correction to: Milling-Related Brittle Fracture Mechanisms of a SiCp/Al Composite

Correction to "Proppant Settlement and Long-Term Conductivity Calculation in Complex Fractures"

Milling-Related Brittle Fracture Mechanisms of a SiCp/Al Composite (vol 52, pg 81, 2020)

Publisher Correction: Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes

Erratum to: Description of full-range strain hardening behavior of steels

Erratum: Corrigendum: Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Erratum to: An Experimental Study of the Effects of Filling Degree on Shear Behavior and Acoustic Emission Characteristics of Kaolinite-Filled Granite Joints

RETRACTED: Corrigendum to “Application of the small-angle X-ray scattering technique for structural analysis studies: A review” [J. Mol. Struct. 5 (2018) 391–400]

Correction: Polymer mechanochemistry: from single molecule to bulk material

Corrigendum to “Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process” [Mater. Sci. Eng. A 662 (2016) 456–467] (S0921509316303148) (10.1016/j.msea.2016.03.097))

Correction: Structure Evolution, Amorphization and Nucleation Studies of Carbon-Lean to -Rich SiBCN Powder Blends Prepared by Mechanical Alloying.

Corrigendum to “Determination of Hardness and Fracture Toughness of Y-TZP Manufactured by Digital Light Processing through the Indentation Technique”

Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))