Abstract:Introduction: The bone ingrowth depth in the porous scaffolds is greatly affected by the structural design, notably the pore size, pore geometry, and the pore distribution. To enhance the bone regeneration capability of scaffolds, the bionic design can be regarded as a potential solution.Objectives: We proposed a Haversian system-like gradient structure based on the triply periodic minimal surface architectures with pore size varying from the edge to the center. And its effects in promoting bone regeneration were evaluated in the study.Methods: The gradient scaffold was designed using the triply periodic minimal surface architectures. The mechanical properties were analyzed by the finite element simulation and confirmed using the universal machine. The fluid characteristics were calculated by the computational fluid dynamics analysis. The bone regeneration process was simulated using a in silico computational model containing the main biological, physical, and chemical variation during the bone growth process. Finally, the in vitro and in vivo studies were carried out to verify the actual osteogenic effect.Results: Compared to the uniform scaffold, the biomimetic gradient scaffold demonstrated better performance in stress conduction and reduced stress shielding effects. The fluid features were appropriate for cell migration and flow diffusion, and the permeability was in the same order of magnitude with the natural bone. The bone ingrowth simulation exhibited improved angiogenesis and bone regeneration. Higher expression of the osteogenesis-related genes, higher alkaline phosphatase activity, and increased mineralization could be observed on the gradient scaffold in the in vitro study. The 12-week in vivo study proved that the gradient scaffold had deeper bone inserting depth and a more stable bone-scaffold interface.Conclusion: The Haversian system-like gradient structure can effectively promote the bone regeneration. This structural design can be used as a new solution for the clinical application of prosthesis design.(c) 2023 The Authors. Published by Elsevier B.V. on behalf of Cairo University. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

The Feasibility of Prosthesis Design with Gradient Porous Structural

PERFORMANCE ORIENTED DESIGN OF SEMIREGULAR ANISOTROPIC POROUS STRUCTURES

Efficient Biscale Design of Semiregular Porous Structures with Desired Deformation Behavior

Parametric Design of Porous Structure and Optimal Porosity Gradient Distribution Based on Root-Shaped Implants

Design of graded porous bone-like structures via a multi-material topology optimization approach

Parametric Design of Hip Implant With Gradient Porous Structure

Parametric design and performance study of continuous gradient triply periodic minimal surface bone scaffold

Finite-element design and optimization of a three-dimensional tetrahedral porous titanium scaffold for the reconstruction of mandibular defects.

Design and analysis of the mechanical properties of controllable porous scaffolds for bone tissue engineering

Isogeometric Analysis-Based Topological Optimization for Heterogeneous Parametric Porous Structures.

Design of a Haversian System-Like Gradient Porous Scaffold Based on Triply Periodic Minimal Surfaces for Promoting Bone Regeneration

Design and 3D printing of ceramic maxillofacial prosthesis with gradient pores based on Voronoi-Tessellation principle

Multi-objective optimization for designing porous scaffolds with controllable mechanics and permeability: a case study on triply periodic minimal surface scaffolds

Design of biomedical gradient porous scaffold via a minimal surface dual-unit continuous transition connection strategy

Gyroid-based functionally graded porous titanium scaffolds for dental application: Design, simulation and characterizations

Influence of conical graded porous architecture on the mechanical, failure behavior and fluid-flow properties for bone scaffold application

Design of Porous Structure Based on the Voronoi Diagram and Stress Line for Better Stress Shielding Relief and Permeability

Full compression response of FG-based scaffolds with varying porosity via an effective numerical scheme

Novel Design and Finite Element Analysis of Diamond-like Porous Implants with Low Stiffness

Structural Design and Finite Element Simulation Analysis of Grade 3 Graded Porous Titanium Implant

A novel method to design gradient porous structures with conformal density