Abstract:Porous structures are ubiquitous in many thermal management and energy conversion systems. The morphology of a porous structure has significant impact on the fluid flow, heat/mass transport, and strength performance. However, the available fabrication techniques are not capable of directly tailoring porous structures with well-controlled pore features and functional graded pore morphology, thereby limiting the performance enhancements for these systems. In this study, a triply periodic minimal surface (TPMS) based method was developed to customize the morphology of porous media with well-controlled pore features and to fabricate these parts with additive manufacturing. Porous structures with designed pore parameters were built based on the mathematically defined iWP surface, primitive surface, diamond surface and gyroid surface. Before performing flow and heat transfer simulations, morphological analysis was conducted to establish the connections between the geometrical parameters and the performance of the porous structure (flow resistance, heat transfer, and strength). The porous structures were compared in terms of their structural strength, specific pressure drop, interstitial/volumetric heat transfer coefficients and the ratio of the Colburn factor relative to the friction factor. The TPMS porous structures indicated that much higher strength than the simple cubic packing structure (approximation of sintered metal particles) due to their reasonable struct connectivity. Computations demonstrated that the type P structure had the lowest flow resistance and highest comprehensive heat transfer coefficient (j/f). The high specific surface area, continuous changes in the flow direction, periodic mixing/redistribution and flow acceleration contributed to the higher volumetric heat transfer coefficients in the type W/G structures.

Isogeometric Analysis-Based Topological Optimization for Heterogeneous Parametric Porous Structures.

PERFORMANCE ORIENTED DESIGN OF SEMIREGULAR ANISOTROPIC POROUS STRUCTURES

Efficient Biscale Design of Semiregular Porous Structures with Desired Deformation Behavior

Isotropic Porous Structure Design Methods Based on Triply Periodic Minimal Surfaces

OPS-ITO: Development of Isogeometric Analysis and Topology Optimization in OpenSEES for Free-Form Structural Design

A Topology Optimisation-Based Design Method for 3D Voronoi Porous Structures and Its Application for Medical Pillows

Design optimization of interconnected porous structures using extended triply periodic minimal surfaces

Efficient Representation and Optimization for TPMS-Based Porous Structures

Free-form Multi-Level Porous Model Design Based on Truncated Hierarchical B-spline Functions.

Multi-Material Topology Optimization for Spatial-Varying Porous Structures

Porous scaffold design by solid T-splines and triply periodic minimal surfaces

Thermal-mechanical coupling topology optimization of multi-phase infill structures with a non-gradient porosity optimization method

Multi-objective optimization for designing porous scaffolds with controllable mechanics and permeability: a case study on triply periodic minimal surface scaffolds

Topology Optimization of Self-supporting Porous Structures Based on Triply Periodic Minimal Surfaces.

2.5D Porous Structure Design Based on Mechanical Topology Optimization and Principal Stress Field

Hierarchical topology optimization with varying micro-structural aspect ratios

Heterogeneous Porous Scaffold Generation Using Trivariate B-spline Solids and Triply Periodic Minimal Surfaces

Morphology, Flow and Heat Transfer in Triply Periodic Minimal Surface Based Porous Structures

A multiscale topological design method of geometrically asymmetric porous sandwich structures for minimizing dynamic compliance

Optimization Design, Mechanical Properties, and Energy Absorption Characteristics of Thin‐Walled Porous Structures Manufactured by Selective Laser Melting

Topology optimization of sandwich structures with solid-porous hybrid infill under geometric constraints