Abstract:3D monolithic integration of logic and memory devices has emerged as one of the key enablers for next-generation electronic devices to address the ever-increasing demand for higher integration density, better performance and energy efficiency. BEOL-compatible oxide semiconductors show great potential to revolutionize the field thanks to their unique properties [1]. We present our recent advancement related to BEOL-compatible oxide semiconductors for logic and memory applications. The digital-etch-enabled nanowire transistors and α -IGZO-based eDRAM will first be discussed, followed by the ferroelectric (FE) memories with high performance and novel structures utilizing α -IGZO or ALD-deposited ZnO as the channel. Ultra-scaled amorphous IGZO ( α -IGZO) nanowire field-effect transistors (NW-FETs) hold great potential for applications demanding high performance and integration density. To realize the fabrication of high-quality and aggressively-scaled nanowire structures, a novel digital etching method for amorphous α -IGZO materials has been proposed and demonstrated [2]. Confirmed by the SEM images of an α -IGZO nanowire before and after digital etching, a notable nanowire width W NW reduction can be observed. We have the thinnest α -IGZO nanowire achieved by the digital etching with a W NW of approximately 20 nm. By further developing the transistor upon the nanowire, the α -IGZO NW-FET attains a good subthreshold swing (SS) of 80 mV/decade and a high peak extrinsic transconductance ( G m, ext ) of 612 μS/μm at V DS of 2 V (456 μS/μm at V DS = 1 V). Compared to the previous studies, our IGZO NW-FET achieves one of the highest peak G m values among all IGZO-based FETs. Besides the BEOL compatibility and high on-current, ultra-low subthreshold leakage makes α -IGZO FETs extremely promising for eDRAM. We further investigated the potential of α -IGZO eDRAM by developing the charge-domain compute-in-memory (CiM) [3]. Experiments have demonstrated small SS, large on-state current, and long-time charge retention with our dedicated 4T1C memory cell. With differential cell structure, an even higher tolerance for charge loss can be attained. With experiment-calibrated benchmarking in the VGG-8 network for CIFAR-10 image classification tasks, 2092 TOPS/W power efficiency for the CiM core can be expected, outperforming the prior TFT and CMOS-based CiM approaches, exhibiting significant advantages for ultra-low-power applications. The integration of doped-HfO 2 FE material and oxide semiconductor, both BEOL-compatible with large-scale and cost-effective deposition, presents a promising avenue for advancing data storage in the future. We have developed the high-performance α -IGZO Fe-FET with a metal-ferroelectric-metal-oxide-semiconductor (MFMIS) structure as well as the Fe TCAM [4]. The α -IGZO Fe-FET achieves a large memory window of ~3 V with high reliability, while the Fe TCAM reduces the transistor number from 16 to 2 compared to the traditional SRAM-based one. Besides α -IGZO, we believe that ALD-based oxide semiconductors featuring high controllability of film thickness and conformal coverage of the 3D structures can create new opportunities for novel device structure and integration. The fin-gate ZnO Fe-FET stands for a great example while not only outstanding device performance but also suppressed device-to-device variation due to the unique structure have been demonstrated, holding tremendous promise for high-density 3D integration [5]. Acknowledgments: This work is supported by Singapore Ministry of Education (Tier 2: MOE2018-T2-2-154, Tier 1: R-263-000-D65-114). References : [1] S. Dutta et al. , IEDM, p. 36.4., 2020. [2] K. Han et al. , VLSI , 2021, p. T10-1. [3] J. Liu et al. , IEDM , 2021, p. 46.2. [4] C. Sun et al. , VLSI , 2021, p. T7-4. [5] Q. Kong et al. , IEDM , 2022, p. 12.3.

High Performance 14nm SOI FinFET CMOS Technology with 0.0174&#x00b5;m<sup>2</sup> Embedded DRAM and 15 Levels of Cu Metallization

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

Computing-in-memory Circuits and Cross-Layer Integrated Design and Optimization: from SRAM to FeFET

A low operating power FinFET transistor module featuring scaled gate stack and strain engineering for 32/28nm SoC technology

High Performance Junctionless FDSOI SiGe Channel P-Finfet with High ION/IOFF Ratio and Excellent SS

22Ffl: A High Performance and Ultra Low Power Finfet Technology for Mobile and Rf Applications

13.2 A 14nm FinFET 128Mb 6T SRAM with VMIN-enhancement techniques for low-power applications

A 45nm Low Power Bulk Technology Featuring Carbon Co-Implantation And Laser Anneal On 45 Degrees-Rotated Substrate

Scalable CMOS-BEOL compatible AlScN/2D Channel FE-FETs

A Semi-Floating Gate Memory Based on SOI Substrate by TCAD Simulation

Multiple Workfunction High Performance FinFETs for Ultra-low Voltage Operation

A 22nm FDSOI Technology Optimized for RF/mmWave Applications

A 45nm low power bulk technology featuring carbon co-implantation and laser anneal on 45°-rotated substrate

A SiCOHBEOL interconnect technology for high density and high performance 65 nm CMOS applications

Scalable CMOS back-end-of-line-compatible AlScN/two-dimensional channel ferroelectric field-effect transistors

(Invited) BEOL-Compatible Oxide Semiconductor Logic and Memory Devices

Extended 0.13 /spl mu/m CMOS technology for the ultra high-speed and MS/RF application segments

High Performance 70 Nm Cmos Device and Key Technologies

CMOS backend-of-line compatible memory array and logic circuitries enabled by high performance atomic layer deposited ZnO thin-film transistor

A 90 Nm CMOS MS/RF Based Foundry SOC Technology Comprising Superb 185 GHz F/sub T/ RFMOS and Versatile, High-Q Passive Components for Cost/performance Optimization

High Performance Transistors Featured in an Aggressively Scaled 45nm Bulk Cmos Technology

High Performance 14nm SOI FinFET CMOS Technology with 0.0174&amp;#x00b5;m&lt;sup&gt;2&lt;/sup&gt; Embedded DRAM and 15 Levels of Cu Metallization