Abstract:A series of ZrO2 and polymer doped-ZrO2 sols have been synthesized by the controlled hydrolysis of zirconium n-propoxide. Acetic acid was used as the chelating agent. Poly(ethylene glycol)(PEG) 200 and polyvinylpyrrolidone(PVP) were introduced to produce the hybrid sols. ZrO2 and the polymer doped-ZrO2 optical thin films were then prepared by spin-coating the stable sols on K9 glass substrates. Effects of various synthetic parameters were studied, on the sol stability, the microstructure of colloidal system, the structural and optical properties of the films, as well as the laser damage resistance. In our reaction systems, both hydrolysis and chelation coexist. The preference for any of the two reactions strongly depends on the system composition and ultimately determines the stability and microstructure of the colloidal system. Besides, the addition of a proper amount of PEG200 and PVP, which probably acts as the competitive ligands, particle surface protective polymers and structure directive agents, can modify the hydrolysis-condensation process, thus producing more stable, uniform sols with mass fractal structure (fm=2.33—2.46) and average particle diameter of 19.1—23.7nm. Benefiting from the precursor sol structure, the polymer doped-films exhibit excellent surface planarity and uniform inner structure, which endows the films with good optical property and excellent laser damage resistance. For instance, the hybrid film with 10% PEG200 and 15% PVP (mass fractions) showed a high laser damage threshold of 24.5J/cm2 (for 1ns pulse duration) and a reflectivity increase of about 2% than that of the substrate at wavelength of about 1000nm.

Effect of UV-Irradiation on Sol-Gel Optical Films

Optical Properties of Highly Photosensitive Hybrid Sol-Gel Films

Preparation of Sol-Gel ZrO2 Films with High Laser-Induced Damage Threshold under High Temperature

Preparation of ZrO_2/SiO_2 Multilayer Films Via Chemical Methods

Preparation of Sol-Gel Zro(2)/Sio(2) Multi-Layer Film Based on Uv-Irradiation Treatment

Effect of porosity on the laser induced damage threshold of sol-gel SiO2 and ZrO2 single layer films

Sol-gel Processing of ZrO2 and Polymer Doped-Zro2 Monolayer Reflective Films with High Laser Damage Threshold

Comparison of Laser-Induced Damage of Monolayer ZrO2 Films Preparated by PVD and Sol-Gel Methods

Effect of Gamma-Rays Irradiation on Wettability of Sol–gel Silica Nanofilms

Ultraviolet Laser-Induced Damage on Fused Silica Substrate and Its Sol-Gel Coating.

Laser-induced Damage of Sol-Gel Silica Acid and Basic Thin Films

Laser-induced damage mechanism of the sol–gel single-layer SiO2 acid and base thin films

Characteristics of laser-densified and conventionally heat treated sol–gel derived silica–titania films

Effect of Ultraviolet Irradiation on Photoelectric Properties of Indium Tin Oxide (ito) Thin Film Deposited by Sol-Gel Method

Effect of Ammonia Treatment on Laser-induced Damage Threshold of Sol-Gel Silica Films

Sol-Gel Preparation of Ag/ZnO Films and Their Electrical and Optical Properties

Sol-gel Preparation of a Silica Antireflective Coating with Enhanced Hydrophobicity and Optical Stability in Vacuum

Performance degradation mechanism of γ-ray irradiated sol-gel silica film

Preparation and Atomic Oxygen Erosion Resistance of Silica Film Formed on Silicon Rubber by Sol–gel Method

Influence of Porosity on Laser Damage Threshold of Sol–gel ZrO2 and SiO2 Monolayer Films

UV-Irradiation-Induced Refractive Index Increase of Ge-Doped Silica Films