Abstract:Coal tar pitch was ground into powder and hydroformed with high pressure. After pre-oxidation, the pitch was activated by CO2 at high temperature. The effects of different preparation conditions on the yield, pore structure and phenol adsorption capacity of activated carbon were investigated, and activated carbon prepared under suitable conditions had good adsorption performance. A pore volume of 1-10 nm is the main absorption structure according to the analysis of pore size distribution and phenol adsorption capacity. The activated carbon showed high mechanical strength through compressive strength tests. Graphite nanocrystals around 5 nm were observed in the TEM images, and it illustrates that grain refinement results in the high strength. These nanocrystal stacked structures are easier to make and enlarge pores by activation than graphite layer stacked structures. Surface functional groups are considered not to be the active sites of phenol adsorption as suggested by the results of FTIR and Boehm's titration, and acidic oxygen-containing functional groups are harmful to phenol adsorption, which happen to be removed in the reductive preparation atmosphere. The donor-acceptor complex mechanism can be ruled out, and the pi-pi interactions are considered the most likely mechanism. The Langmuir and Reach-Peterson models are better fitted to the adsorption isotherms. Adsorption kinetics fit the intraparticle diffusion model best. Comparison of different activated carbons shows that suitable pore size is important for phenol adsorption. Thermodynamic parameters demonstrate that the adsorption process is spontaneous and exothermic, and the entropy increases. Pitch-based high-strength columnar activated carbon is an effective and low cost adsorbent for phenol wastewater treatment. This carbon nanocrystal material also provides a new direction for catalyst carriers.

Study on the Preparation of Petroleum Pitch-Based Activated Carbon

A study on the preparation of pitch-based high-strength columnar activated carbon and mechanism of phenol adsorption from aqueous solution

Co-carbonization Behaviors of Petroleum Pitch/waste SBS: Influence on Morphology and Structure of Resultant Cokes

Preparation of pitch semi-coke water slurry and its properties of slurryability and gasification

Study on the preparation of high value-added activated carbon from petroleum coke: Comparison between one- and two-step methods for carbonization and activation

Preparation of pitch-based activated carbon fibers with high specific surface area and excellent adsorption properties

Effect of petroleum-based coating pitch preparation on toluene insolubles generation

Preparation and characterization of pitch coke from oxidized polymerized pitch

Preparation of micro-porous monolithic activated carbon from anthracite coal using coal tar pitch as binder

Evaluating of the oxidative behaviors of isotropic pitch fractions for optimal the mechanical properties of isotropic pitch-based carbon fibers

Insight into pore structures evolution and applications in lithium-sulfur battery of pitch fractions-based activated carbons

Preparation with different mixing ratios of anatase to activated carbon and their photocatalytic performance

INFLUENCE OF SOLVENT IMMERSION ON THE OXIDATIVE STABILIZATION OF PITCH SPHERES

STUDY ON THE PREPARATION OF PITCH-BASED ION EXCHANGE RESIN AND ITS MECHANISM

Further processing and prospect of coal tar pitch utilization

Effect of the air oxidation stabilization of pitch on the microstructure and sodium storage of hard carbons

Optimizing the Micro/Mesoporous Structure of Hierarchical Porous Carbon Synthesized from Petroleum Pitch Using the Solvent-Free Method for Ultra-Fast Capacitive Deionization

Analyzing solid fossil-fuel pitches by a combination of Soxhlet extraction and Fourier transform ion cyclotron resonance mass spectrometry

Petroleum Pitch-Derived Porous Carbon Materials as Metal-Free Catalyst for Dry Reforming of Methane

Preparation of Spherical Activated Carbon and Their Physicochemical Properties

Preparation and Characterization of Polymer-Based Spherical Activated Carbons