Abstract:As the most commonly used method for industrial activated carbon preparation, physical activation is usually accompanied by significant loss of raw materials, especially when the pore structure of activated carbon is well developed. This not only reduces yields, but also increases costs. To enhance both yield and pore structure of activated carbon, we proposed a facile and scalable method called "fast pyrolysis-physical activation". After fast pyrolysis, although the initial pore volume of the semi-coke decreases, the rapid release of volatiles promotes the increase of mesopore and macropore volumes and the development of micron-scale cracks, which is beneficial for CO2 mass transfer and reduces diffusion resistance. Therefore, compared to slow pyrolysis, the activated carbon produced through this method has a higher pore volume (increased by 25.9 %-30.0 %) and a larger SBET (increased by 26.7 %-38.3 %), while the yield remains almost unchanged. Consequently, due to the increase in pore volume and high yield of the activated carbon, the CO2 adsorption capacity (25 degrees C, 1 bar) of ACB-K700 increases from 2.02 mmol/g to 2.37 mmol/g compared to ACB-M700, and the total CO2 adsorption capacity of activated carbon prepared from the same mass of raw coal (1 g) increases from 1.07 mmol to 1.16 mmol. Due to the pre-formed pores inside the semi-coke, the gas activator molecules are able to penetrate deep into the particles, which not only reduces the ineffective etching that occurs on the surface, but also promotes the development of pore structure. In conclusion, this study provides a new pore development model for physical activation, and also provides a new method to produce activated carbon rapidly and massively, while the pore structure is well developed.

Study on the preparation of high value-added activated carbon from petroleum coke: Comparison between one- and two-step methods for carbonization and activation

Effects of Chemical Modification of Petroleum Cokes on the Properties of the Resulting Activated Carbon

Preparation and performance of coal-based activated carbon based on an orthogonal experimental study

Preparation of High Surface Area Activated Carbon from Petroleum Green Coke

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Comparison and analysis of one- and two-step activation for preparation of activated carbon from furfural residues

Effects of the weight ratio between potassium hydroxide and petroleum coke on properties of activated carbon

Study on the mechanical strength and iodine adsorption behavior of coal-based activated carbon based on orthogonal experiments

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Activated coke preparation by physical activation of coal and biomass co-carbonized chars

Influence Of Coal Preoxidation On The Porosity Of The Activated Carbons With Steam Activation

Boosting the adsorption capacity of activated carbon prepared from Amygdalus communis shells using physicochemical co-activation method

Facile Preparation of Oxygen-Rich Activated Carbon from Petroleum Coke for Enhancing Methylene Blue Adsorption

COMPARISONS OF PORE STRUCTURE AND ELECTROCHEMICAL PERFORMANCES OF CARBONS ACTIVATED BY KOH AND NaOH

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

Efficient Production of Activated Carbon with Well-Developed Pore Structure Based on Fast Pyrolysis-Physical Activation

One-Step Catalytic Activation Promoting Pore Development of Zhundong Coal-Based Activated Coke: A Compared Study with Conventional Carbonization–Activation Combined Process

Preparation of Activated Carbons from Wet Activated Sludge by Direct Chemical Activation.

Parameters influence establishment of the petroleum coke genesis on the structure and properties of a highly porous carbon material obtained by activation of KOH

Effect of preparation methods of activated carbons on the cigarette smoke adsorption

Methods for preparation and activation of activated carbon: a review